Abstract:Porous polymer membranes have been widely used as matrixes of gel polymer electrolytes (GPEs) for lithium-ion batteries (LIBs). This work demonstrates the creation of lithium-ion-conducting channels in GPEs made of porous membranes prepared by a non-solvent-induced phase separation (NIPS) process. Poly(ethylene glycol) (PEG)-grafted poly(vinyl butyral) (PVB-g-PEG) is employed as the raw material for the preparation of the porous membranes. In the NIPS process, the hydrophilic PEG segments appear at the pore walls of the resulting porous membranes to increase the liquid electrolyte uptake of the membranes. Moreover, the PEG segments covering the pore walls create a hydrophilic domain and lithium-ion-conducting channels, consequently to facilitate lithium-ion transportation through the membranes. The PVB-g-PEG-based GPEs exhibit high lithium-ion conductivities of 0.98-1.86 mS cm(-1), which are much higher than the value recorded for the neat PVB-based GPE (0.57 mS cm(-1)). Discharge capacities of 150 and 72 mAh g(-1) have been recorded for batteries employing the prepared GPE at charging rates of 0.2C and 10C, respectively. A 48% capacity retention ratio has been obtained at 10C charging rate. The battery also demonstrates a long-term stability in a charge-discharge cycling test at 0.5C. An effective approach for designing porous membrane-based GPEs for high-rate lithium-ion batteries has been demonstrated.

Preparation and Properties of Gel Membrane Containing Porous PVDF-HFP Matrix and Cross-Linked PEG for Lithium Ion Conduction

Lithium ion conducting gels containing porous PVDF-HFP matrix filled with crosslinked PEG

Preparation Of Pvdf/P(Mma-Co-Pegma) Porous Membranes Via Phase Inversion Process For Gel Polymer Electrolyte

Preparation of PVDF- HFP Porous Membrane Via Thermally Induced Phase Separation and Application in Lithium Ion Battery

Effects of PDMS with Polyether Side Chains on the Fluoropolymer Based Gel Lithium Electrolytes

Novel Configuration of Polyimide Matrix-Enhanced Cross-Linked Gel Separator for High Performance Lithium Ion Batteries

Gel-filling polymer electrolytes based on porous PVDF membrane for rechargeable lithium batteries

Preparation and characterization of a novel microporous PE membrane supporting composite gel polymer electrolyte

Gel polymer electrolyte-based on PVDF/fluorinated amphiphilic copolymer blends for high performance lithium-ion batteries

PVDF-HFP membrane prepared via TIPS process as the matrix of gel electrolyte for lithium ion battery

Chemically Modified Polyvinyl Butyral Polymer Membrane As a Gel Electrolyte for Lithium Ion Battery Applications

Design of amphiphilic poly(vinylidene fluoride-co-hexafluoropropylene)-based gel electrolytes for high-performance lithium-ion batteries

Creation of Lithium-Ion-Conducting Channels in Gel Polymer Electrolytes Through Non-Solvent-Induced Phase Separation for High-Rate Lithium-Ion Batteries

Preparation and Properties of Poly (vinylidene Fluoride)/poly(dimethylsiloxane) Graft (poly(propylene Oxide)-Block-poly(ethylene Oxide)) Blend Porous Separators and Corresponding Electrolytes

Preparation Of Poly (Dimethylsiloxane) Graft (Poly(Propylene Oxide)-Block-Poly (Ethylene Oxide) Modified Pvdf Separator And Its Use In Lithium Ion Batteries

Preparation and Characterization of Safety Pvdf/P(Mma-Co-Pegma) Active Separators by Studying the Liquid Electrolyte Distribution in This Kind of Membrane

Microporous Pvdf-Hfp Based Gel Polymer Electrolytes Reinforced by Pegdma Network

Preparation and Properties of Gel‐filled PVDF Separators for Lithium Ion Cells

Preparation and properties of poly(ethylene oxide) gel filled polypropylene separators and their corresponding gel polymer electrolytes for Li-ion batteries

Preparation and Performances of A Novel Gel Polymer Electrolyte

Ionic Conductivity Enhancement in Gel Polymer Electrolyte Membrane with N-methyl-N-butyl-piperidine-bis(trifluoromethylsulfonyl) Imide Ionic Liquid for Lithium Ion Battery