Abstract:In this study, glycidyl methacrylate was copolymerized with poly(ethylene glycol) methyl ether methacrylate to obtain a copolymer {poly[glycidyl methacrylate-poly(ethylene glycol) methyl ether methacrylate] [P(GMA-PEGMA)]}, which was crosslinked with alpha,omega-diamino poly(propylene oxide) (Jeffamine) at various weight ratios and molecular weights to form novel gel polymer electrolytes (GPEs). The crosslinked copolymers were characterized by Fourier transform infrared spectroscopy and thermal analysis. The crosslinked polymers were amorphous in the pristine state and became crystallized after they were doped with lithium electrolyte. Furthermore, the crosslinking degree of the crosslinked polymers increased with increasing weight ratio of Jeffamine, and both the swelling properties and mechanical behaviors of the crosslinked polymers were heavily affected by the weight ratio and molecular weight of Jeffamine. The ionic conductivity (sigma) of the GPEs from the crosslinked copolymers was determined by alternating-current impedance spectroscopy. A higher molecular weight and increased weight ratio of Jeffamine resulted in a higher sigma. The GPE based on P(GMA-PEGMA) crosslinked with an equal weight of Jeffamine D2000 exhibited the highest sigma of 8.29 x 10(-4) S/cm at 25 degrees C and had a moderate mechanical strength. These crosslinked copolymers could be potential candidates for the construction of rechargeable lithium batteries. (C) 2011 Wiley Periodicals, Inc. J Appl Polym Sci 120: 2979-2984, 2011

Preparation and Performances of A Novel Gel Polymer Electrolyte

Preparation and Properties of Gel Membrane Containing Porous PVDF-HFP Matrix and Cross-Linked PEG for Lithium Ion Conduction

Preparation Of Pvdf/P(Mma-Co-Pegma) Porous Membranes Via Phase Inversion Process For Gel Polymer Electrolyte

Lithium ion conducting gels containing porous PVDF-HFP matrix filled with crosslinked PEG

Preparation and Characterization of Novel Crosslinked Poly[glycidyl Methacrylate–poly(ethylene Glycol) Methyl Ether Methacrylate] As Gel Polymer Electrolytes

Crosslinked poly(acrylonitrile–glycidyl methacrylate) as a novel gel polymer electrolyte

Preparation and characterization of a semi-interpenetrating network gel polymer electrolyte

Preparation and Properties of Gel Polymer Electrolytes with Li1.5Al0.5Ge1.5(PO4)3 and Li6.46La3Zr1.46Ta0.54O12 by UV Curing Process

Preparation and Properties of a High-Performance EOEOEA-Based Gel-Polymer-Electrolyte Lithium Battery

Gel polymer electrolyte based on PVDF-HFP:PMMA incorporated with propylene carbonate (PC) and diethyl carbonate (DEC) plasticizers : electrical, morphology, structural and electrochemical properties

Gel polymer electrolyte-based on PVDF/fluorinated amphiphilic copolymer blends for high performance lithium-ion batteries

An in-situ cross-linked network PMMA-based gel polymer electrolyte with excellent lithium storage performance

Synthesis and Characterization of Gel Polymer Electrolyte Based on Epoxy Group via Cationic Ring-Open Polymerization for Lithium-Ion Battery

In-situ Crosslinked Gel Polymer Electrolytes Based on Ionic Monomers as Charge Carriers for Lithium-Ion Batteries

Poly (Vinylidene Fluoride-Hexafluoropropylene)–Lithium Titanium Aluminum Phosphate-Based Gel Polymer Electrolytes Synthesized by Immersion Precipitation for High-Performance Lithium Metal Batteries

PVDF-HFP-SN-based gel polymer electrolyte for high-performance lithium-ion batteries

Study of poly (organic palygorskite-methyl methacrylate)/poly(vinylidene fluoride-co-hexafluoropropylene) blended gel polymer electrolyte for lithium-ion batteries

Preparation And Characterization Of Gamma-Ray Irradiated Gel Polymer Electrolyte For Lithium-Ion Polymer Batteries

Novel preparation of nanocomposite polymer electrolyte and its application to lithium polymer batteries

Design of amphiphilic poly(vinylidene fluoride-co-hexafluoropropylene)-based gel electrolytes for high-performance lithium-ion batteries

Crosslinked Gel Polymer Electrolyte from Trimethylolpropane Triglycidyl Ether by In Situ Polymerization for Lithium-Ion Batteries