Abstract:K-carrageenan and various concentrations of zinc nitrate hexahydrate have been combined to develop a zinc ion-conducting biopolymer electrolyte membrane using the solution casting method. To examine the amorphous nature of the samples, X-ray diffraction (XRD) study has been used. The maximum amorphous nature is observed for 1 g K-carrageenan with 1.1 M. wt % of zinc nitrate hexahydrate biopolymer membrane. Fourier transform infrared spectroscopy (FTIR) investigations have shown that the complexation occurs between the K-carrageenan with zinc nitrate hexahydrate. Surface morphology of Pure K-carrageenan, 1 g K-carrageenan with 1.1 M.wt % of zinc nitrate hexahydrate and 1 g K-carrageenan with 1.2 M.wt % of zinc nitrate hexahydrate have been studied by SEM analysis. Pure K-carrageenan membrane (SEM) has uniform surface with uniform small pores. 1 g K-carrageenan with 1.1 M.wt % of zinc nitrate hexahydrate membrane (SEM) shows rectangular rod-shaped nature along with pores of moderate diameter. 1 g K-carrageenan with 1.2 M.wt % of zinc nitrate hexahydrate membrane SEM shows rectangular rod-shaped nature along with pores of moderate diameter and aggregates. For the zinc-doped biopolymer membrane samples, the differential scanning calorimetry (DSC) is used to determine the glass transition temperature. Pure K-carrageenan has got T g value at 37.04 °C. When the salt concentration is increased upto 0.9 M.wt % of the T g value increases. When the salt concentration is further increased upto 1.1 M.wt % of the T g value decreases. Highest zinc ion conducting membrane has got a T g value of 75.95 °C. According to electrochemical impedance spectroscopy (EIS), the 1 g K-carrageenan with 1.1 M. wt % of zinc nitrate hexahydrate membrane has highest zinc ion conductivity of 2.9 × 10 −3 S cm −1 . According to the linear sweep voltammetry (LSV) investigation, the 1 g K-carrageenan with 1.1 M. wt % of zinc nitrate hexahydrate membrane has shown a wide electrochemical stability window of 2.75 V. The Evans polarization method determined that Zn 2+ ion has a transference number of 0.42. The cyclic stability of highest conducting biopolymer membrane (Zn 2+ ion) is studied by Cyclic Voltammetry. The electrolyte used in the construction of the primary zinc battery is 1 g K-carrageenan with 1.1 M. wt % of zinc nitrate hexahydrate having highest zinc ion conductivity. For this built-in battery, the OCV (Open Circuit Voltage) is found to be 1.43 V.

Preparation of pectin biopolymer electrolyte for zinc-ion battery application

Conducting biopolymer electrolyte based on pectin with magnesium chloride salt for magnesium battery application

Electrical conductivity and dielectric relaxation behaviour of PEO/PVdF-based solid polymer blend electrolytes for zinc battery applications

Aqueous Acidic Pectin‐based Solution as Electrolyte and Pretreatment Solution for Zinc Ion Battery Anodes

Bio-host pectin complexed with dilithium borate based solid electrolytes for polymer batteries

High electrochemical and mechanical performance of zinc conducting-based gel polymer electrolytes

A Poly(ethylene Carbonate)-Based All Solid State Zinc Ion Battery

Preparation of eco-friendly biopolymer electrolyte, K-carrageenan with zinc nitrate hexahydrate salt, for application in electrochemical devices

Polymer Chain‐Guided Ion Transport in Aqueous Electrolytes of Zn‐Ion Batteries

Investigating the Zinc Deposition Behavior in Aqueous Zinc-Ion Batteries with PEG/Cellulose/ZnCl 2 Water-In-Salt Electrolytes via a Homemade Visualized Three-Electrode Tubular Cell

Performance Comparison of Three Polymer Electrolytes for Zinc Ion Batteries

Green and Scalable Biopolymer‐Based Aqueous Polyelectrolyte Complexes for Zinc‐Ion Charge Storage Devices

Aqueous Zinc Ion Battery with Potassium Selective Hyper Cross-Linked Dibenzo-18-Crown-6-Ether Membrane

Biopolymer electrolyte from banana powder-konjac glucomannan for zinc-ion batteries

Anion‐Anchored Polymer‐in‐Salt Solid Electrolyte for High‐Performance Zinc Batteries

Properties enhancement of carboxymethyl cellulose with thermo-responsive polymer as solid polymer electrolyte for zinc ion battery

Engineering Polymer Glue towards 90% Zinc Utilization for 1000 Hours to Make High‐Performance Zn‐Ion Batteries

Preparation of Alkaline Polyelectrolyte Membrane Based on Quaternary Ammonium Salt–Modified Cellulose and Its Application in Zn–Air Flexible Battery

Synergetic Modulation of Ion Flux and Water Activity in a Single Zn 2+ Conductor Hydrogel Electrolyte for Ultrastable Aqueous Zinc-Ion Batteries

Suppression of Zinc Dendrite Growth by Enhanced Polyacrylamide Gel Electrolytes in Zinc‐ion Battery

A Ternary Cross-linked Gel Electrolyte with High Mechanical Strength and Ionic Conductivity for Ultra-long-life Reversible Zinc Deposition