Abstract:Phenomenological quality criteria extracted from a solidification and microstructure model known as InterDendritic Solidification are utilized to predict transverse cracking in peritectic C–Mn, low‐carbon B–Ti microalloyed, and peritectic Nb‐microalloyed steels during continuous casting with interpretable machine learning models. Balanced accuracies of 92%, 94.6%, and 82.8% indicate good predictive power, and interpretability enables the analyses of transverse cracking. The formation of defects such as cracks in continuous casting deteriorates the quality of cast products and efficiency of steelmaking. To evaluate the risks and identify the root causes of defect formation, phenomenological quality criteria computed with a solidification and microstructure model known as InterDendritic Solidification (IDS) have previously been applied. This approach is computationally efficient and provides a fundamental perspective to defect formation in continuous casting. The aim of this work is to study the capabilities of these criteria as features in predicting transverse cracking with interpretable machine learning models. IDS is coupled with a heat transfer model known as Tempsimu to simulate the continuous casting process. Measured compositions are utilized in the simulations and defects reported at a steelmaking plant are used as labels in classification. Logistic regression, decision tree, and Gaussian Naïve Bayes classifiers are developed to predict transverse cracking in peritectic C–Mn, low‐carbon B–Ti microalloyed, and peritectic Nb‐microalloyed steels. The corresponding balanced accuracies of the best classifiers from cross‐validation are 92%, 94.6%, and 82.8%. Due to the good performance and the interpretability of the developed classifiers, the fundamental causes of transverse cracking and possibilities of avoiding it by changes in the compositions are identified.

Solidification crack characteristics and sensitivity of peritectic steel

Study of Crack Sensitivity of Peritectic Steels

Cracking in a Fe–25Mn–3Si–3Al Steel

Peritectic-Steel Mold Fluxes

A Novel Approach for Evaluating the Contraction of Hypo-Peritectic Steels during Initial Solidification by Surface Roughness

An Axisymmetric Analytical Model for Cracking During Solidification and Its Comparison with the RDG Model

Crack growth path of high-strength steel with different toughness under monotonic and cyclic loadings

Predicting solidification cracking in directed energy deposition of Hastelloy X alloys based on thermal-mechanical model

Investigation on Porosity Formation With Pressure Drop Between Dendrite Tip and Root During Pressurized Solidification of 30Cr15Mo1N Ingot

Investigation on solidification crack susceptibility for weld metals of GH3539 alloy with Trans-Varestraint test

Numerical Simulation of Dendritic Growth During Directional Solidification Considering Peritectic Phase

Assessing the Effects of Steel Composition on Surface Cracks in Continuous Casting with Solidification Simulations and Phenomenological Quality Criteria for Quality Prediction Applications

Effect of Alloying Elements on Solidification Cracking Susceptibility of High Manganese Austenitic Steel

Solidification behaviour and hot cracking susceptibility of a novel Ni-based superalloy

Phase Evolution and Solidification Cracking Sensibility in Laser Remelting Treatment of the Plasma-Sprayed CrMnFeCoNi High Entropy Alloy Coating

Formation of dendrites and strengthening mechanism of dual-phase Ni36Co30Fe11Cr11Al6Ti6 HEA by directional solidification

Coupling of Solidification and Heat Transfer Simulations with Interpretable Machine Learning Algorithms to Predict Transverse Cracks in Continuous Casting of Steel

Peritectic Transformation and Primary Α-Dendrite Dissolution in Directionally Solidified Pb–26%Bi Alloy

Study of Hot Cracking Potential in a 6-Ton Steel Ingot Casting

Solidification Microstructure Selection of the Peritectic Nd-Fe-B Alloys

Environmentally assisted cracking of T91 ferritic-martensitic steel in heavy liquid metals