Abstract:Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Ahead of Print. There is an urgent need to operate thermal power plant at significantly higher temperatures, pressures and flexibility, in order to reduce emissions, increase efficiency and facilitate uptake of renewable energy. This demands significantly improved design of welded connections for thermo-mechanical fatigue (TMF). A common mode of high temperature failure for welded 9Cr steels in such plant is Type IV failure, due to reduced hardness in the inter-critical heat affected zone (IC-HAZ). Little or no work has been previously conducted on TMF characterisation of HAZ of 9Cr steels. This work presents development of a combined Gleeble physically-simulated welding process for P91 heat affected zone, based on measured thermal histories from bead-on-plate welding trials, with in-situ low cycle thermo-mechanical fatigue up to 650°C. The simulated welding process, including post-weld heat treatment (PWHT), is shown to have significant effect on both microstructure and TMF behaviour, including life. The as-welded condition is shown to have the cyclically hardest stable response and the longest life, whereas the PWHT and parent material (PM) cases have similar cyclically soft responses and lives. A recently-developed through-process, physically-based, thermal-metallurgical-mechanical model is adapted and applied to the simulated welding thermal cycle and TMF testing for PM and HAZ specimens. The model is calibrated and validated against high temperature low-cycle fatigue and low-cycle TMF data for PM in the range 400 to 600°C, for different strain-ranges and strain-rates. It is also shown to capture some observed general trends for the simulated HAZ-TMF testing, especially the significant softening effect of PWHT and the significant increase in cyclic strength for the as-welded condition.

Environmentally assisted cracking of T91 ferritic-martensitic steel in heavy liquid metals

Fatigue Behaviour of a 9Cr1MoNbV Martensitic Steel in a Liquid Metal*

Effect of Temperature on Low Cycle Fatigue Behavior of T91 Steel in Liquid Lead-Bismuth Eutectic Environment at 150–550 °C

Insights into Fatigue Crack Propagation Mechanism of T91 Steel in Liquid Lead-Bismuth Eutectic at 150-450 °C

Liquid lead resistance and cracking of novel 1Al-Sc-Y ODS Eurofer steel

Wetting property of liquid Pb on different steel candidates as structural materials for the Generation IV nuclear reactors

Liquid metal embrittlement of 12Cr ferritic/martensitic steel thin-walled tubes exposed to liquid lead-bismuth eutectic

Corrosion performance of different alloys exposed to HTL conditions—A screening study

Corrosion Kinetics of T91 Steel under Low Oxygen Conditions (10-7 Wt% O) in Lead-Bismuth Eutectic at 500 ºc

Combined Gleeble physical welding simulation and low-cycle thermo-mechanical fatigue for heat-affected zone material for 9Cr steel: Experimental testing and through-process model

Effect of Steel Composition and Processing Parameters on the Penetration Depth of Microcracks in ZnFe‐Coated Boron Steels

Investigation of Early Cracking of Dissimilar Metal Welds in a 1000-MW Ultra-supercritical Power Plant Close to the Sea

Environment assisted cracking of 308L weld metal in high temperature water

Environmentally assisted cracking in the fusion boundary region of a SA508-Alloy 52M dissimilar weld joint in simulated primary pressurized water reactor environments

Insights into the Fatigue Damage Mechanism of T91 Steel in Liquid Lead-Bismuth Eutectic at 150-550 °C

Corrosion kinetics of T91 steel under low oxygen conditions (10 −7 wt% O) in lead-bismuth eutectic at 500 °C

Stress Corrosion Behavior of T91 Steel in Static Lead–bismuth Eutectic at 480 °C

Effects of pressurized water reactor environment and cyclic loading parameters on the low cycle fatigue behavior of 304L stainless steel

Oxidation behavior of ferritic/martensitic steels in stagnant liquid LBE saturated by oxygen at 600°C

Micromechanical Finite Element Modelling of Thermo-Mechanical Fatigue for P91 Steels

Hydrogen-assisted cracking and damage tolerance of high-strength lath-martensite steel bars for structural applications