Liquid Lead–bismuth Eutectic Embrittlement Effect on the Tensile Properties of T91 Steel at 350°C

Jing Liu,Zunqi Xiao,Zhizhong Jiang,Lin Luo
DOI: https://doi.org/10.1002/maco.202112530
2022-01-01
Abstract:The effects of pre-exposure and surface notch on the tensile properties of T91 steel in oxygen saturation lead-bismuth eutectic (LBE) have been investigated by slow strain rate tensile tests at 350 degrees C with a strain rate of 1 x 10(-5) s(-1), and the reference tests were performed in Ar gas. The pre-exposure was conducted in liquid LBE at 500 degrees C with an oxygen concentration of 10(-8) wt% for 500 h. It is shown that the tensile properties of the nonpre-exposed specimens whether with or without a notch were not affected by LBE, but obvious liquid metal embrittlement (LME) was observed on the pre-exposure specimens. After being pre-exposed, the notched one was more prone to liquid LBE embrittlement compared to the unnotched specimen. Morphology similar to fatigue striations was observed on the fracture surface of the notched specimen with pre-exposure, which was probably attributed to the rapid growth of the crack. The results revealed that pre-exposure had a critical effect on LME, and surface notch intensified this phenomenon when pre-exposure was present.
What problem does this paper attempt to address?