Abstract:Liquid metal embrittlement (LME) susceptibility appears to be different for body‐centered‐cubic (T) versus face‐centered‐cubic steels. Herein, LME susceptibility is investigated for transformation‐induced plasticity (TRIP) steel, combining both types of crystal structures. The work analyzes potential synergistic impacts by mechanical degradation and corrosion due to the liquid lead–bismuth eutectic (LBE), surface degradation due to surface finish, and the TRIP effect itself. Liquid metal embrittlement (LME) is one of the main concerns in the development of new generations of nuclear reactors, such as lead‐cooled fast reactor systems. Many research efforts have not been able to reveal the mechanisms responsible for having LME‐sensitive phases (ferrite/martensite) and LME‐insensitive phases (austenite). Transformation‐induced plasticity (TRIP) steels combine LME insensitive and sensitive phases but are not studied in lead–bismuth eutectic (LBE) yet. This work aims to investigate the LME susceptibility of TRIP steel in contact with LBE by slow strain rate tensile tests at 350 °C and 5×10−5 s−1 strain rate. In addition, the role of the surface features on the LME susceptibility is also discussed. The obtained results show that TRIP steel is highly susceptible to LME. Corrosion by the liquid LBE, surface degradation effects due to the electrical discharge machining surface finish, the TRIP effect, and mechanical degradation by LBE are all identified to have a certain impact on this severe ductility reduction in the TRIP/LBE system.

Effect of temperature on liquid metal embrittlement susceptibility of an Fe10Cr4Al ferritic alloy in contact with stagnant lead-bismuth eutectic

A comparative study on liquid metal embrittlement susceptibility of three FeCrAl ferritic alloys in contact with liquid lead-bismuth eutectic at 350°C

Liquid metal embrittlement susceptibility of an oxide-dispersion strengthened FeCrAl alloy in contact with liquid lead-bismuth eutectic at 350 °C

Liquid metal embrittlement of 12Cr ferritic/martensitic steel thin-walled tubes exposed to liquid lead-bismuth eutectic

Liquid metal embrittlement of a dual-phase Al0.7CoCrFeNi high-entropy alloy exposed to oxygen-saturated lead-bismuth eutectic

Effect of Temperature on Low Cycle Fatigue Behavior of T91 Steel in Liquid Lead-Bismuth Eutectic Environment at 150–550 °C

Liquid Lead–bismuth Eutectic Embrittlement Effect on the Tensile Properties of T91 Steel at 350°C

Temperature-dependent liquid metal embrittlement of Al 0.7 CoCrFeNi high-entropy alloys induced by equiatomic GaInSnZn melts

Liquid metal embrittlement and fracture behavior of three Mo metals in liquid lead-bismuth eutectic

Liquid metal embrittlement and deformation induced martensite: The case of 316 L austenitic steel LME by liquid eutectic gallium-indium

A Study of Deformation and Strain Induced in Bulk by the Oxide Layers Formation on a Fe-Cr-Al Alloy in High-Temperature Liquid Pb-Bi Eutectic

MEASUREMENTS OF FINE STRUCTURES IN THE LEAD-BISMUTH EUTECTIC ALLOY MELTS BY DIFFERENTIAL SCANNING CALORIMETRY

Liquid Metal Embrittlement Susceptibility of the Transformation‐Induced Plasticity Steel/Lead–Bismuth Eutectic System

Effect of temperature on mechanical properties of Al0.5CoCrCuFeNi wrought alloy

The Effect of Thermal Exposure on the Microstructures and Mechanical Properties of 2198 Al–Li Alloy

High Temperature Tensile Property and Fracture Behavior of Directionally Solidified Fe-Al-Ta Eutectic Composites

Dissolution corrosion of FeCrAl alloy exposed to oxygen-depleted lead-bismuth eutectic containing Ni impurities at 600 °C

Influence of temperature on ductility of nano-ODS steel prepared by low-energy mechanical alloying

Insights into the Fatigue Damage Mechanism of T91 Steel in Liquid Lead-Bismuth Eutectic at 150-550 °C

Liquid Phase Behavior during Elevated Temperature Deformation of the Fine-Grained 5083 Al Alloy

Elevated Temperature Tensile Behavior and Microstructure Evolution of Liquid Phase Sintered 90w–7ni–3fe Alloy