Abstract:The Hall-Petch relationship is important for material design at room temperature. However, it is not well studied at high temperatures. In this work, the influence of different microstructures on the high-temperature mechanical behavior and corresponding softening mechanisms of high-temperature titanium alloy TA15 (Ti-6.5Al-2Zr-1Mo-1 V, wt.%) were studied. Specimens with duplex, Widmanstätten, and coarse Widmanstätten microstructures were obtained through powder metallurgy. High-temperature tensile tests were carried out between 500 and 650°C. It was found that the fracture mode of the Widmanstätten microstructure was transgranular at 500 °C and 550 °C, but intergranular at 600 °C and 650 °C. EBSD analysis revealed that the high-temperature deformation was facilitated by several mechanisms including GB softening, GB migration, grains rotation, and activation of multiple slip systems. High temperature nanoindentation indicated sofenting of individual grains with increasing temperature. In-situ tensile testing under SEM revealed deformation was primarily in grain interior at room temperature, and GBs played a significant role at 650℃. The GB behavior at high temperatures is believed responsible for the inverse Hall-Petch relationship. These findings provide a new perspective for improving the high-temperature mechanical properties and microstructure control of titanium and its alloys.

High Temperature Tensile Property and Fracture Behavior of Directionally Solidified Fe-Al-Ta Eutectic Composites

Tensile and fatigue properties of the Bridgman directionally solidified Fe-Al-Ta eutectic

Mechanical properties of Fe-Al-Ta eutectic composites at higher solidification rates

Compressive Property and Toughening Mechanism of Directionally Solidified Fe(Al, Ta)/Fe2Ta (Al) Eutectic Composites

Microstructure and fracture toughness of the Bridgman directionally solidified Fe-Al-Ta eutectic at different solidification rates

Achieving Enhanced Strength Retention at Elevated Temperatures in Ultrafine-Fibrous Interconnected Al-Ce-Ni Eutectic Alloy Solidified under Super-Gravity Field

Crystal growth mechanism of directionally solidified Fe–Al–Ta eutectic composites at higher solidification rates

High Temperature Oxidation Behavior of Directionally Solidified Fe(Al,Ta)/Fe2Ta(Al) Eutectic Composite

In-situ observations of solidification process of Fe–Al–Ta eutectic alloy

Temperature-dependent Mechanical Properties and Fracture Behavior of Directionally Solidified Ti47Al2Cr2Nb Alloy

In-Situ Study of High Temperature Tensile Fracture Mechanism of Mar-M247 Alloy

High-temperature “Inverse” Hall-Petch relationship and fracture behavior of TA15 alloy

Microstructure evolution of a forged TiAl-Nb alloy during high-temperature tensile testing

Microstructure and high temperature tensile properties of Al–Si–Cu–Mn–Fe alloys prepared by semi-solid thixoforming

Microstructure and Elevated Temperature Tensile Behaviour of Directionally Solidified Nickel Based Superalloy

High-temperature tensile properties and deformation behavior of a multi-phase FeNiCrAlTi alloy

Microstructure and bending behavior of Ti/Al laminated composites reinforced with high-entropy alloy particles

Tensile properties and fracture toughness of TiAl alloys with controlled microstructures

Microstructures and Tribological Properties of TiC Reinforced FeCoNiCuAl High-Entropy Alloy at Normal and Elevated Temperature

Thermal modification of brittle CoFeNi2(Ti3Si5)0.16 eutectic high-entropy alloy by annealing treatment

High-Temperature Tensile Strength of Al10Co25Cr8Fe15Ni36Ti6 Compositionally Complex Alloy (High-Entropy Alloy)