Abstract:Currently, the microstructure regulation of TiAl intermetallic prepared by dual-wire electron beam freeform fabrication (EBF 3 ) is still a huge challenge. The microstructural evolution of TiAl alloys is not clear due to the complex characteristics of the micro-molten pool. In order to elucidate the microstructure evolution mechanism of TiAl alloys in dual-wire EBF 3 , this work selected Ti-50Al (at. %) as the object and investigated the correlation between temperature gradient ( G ), solidification rate ( R ) and columnar-to-equiaxed transition (CET) during solidification via combining experiments and numerical simulations. The transient heat transfer model was established to obtain the temperature field of the micro-molten pool and calculate the ratio of temperature gradient to cooling rate ( G/R ). Combined with the results from experimental observations and numerical simulations, the microstructure prediction map was established to quantitatively clarify the correlation between solidification parameters and microstructure. From the bottom to the top of the micro-molten pool, the Î³-TiAl dendrites transform from columnar crystals with (111) preferred orientation to randomly grown equiaxed crystals and the ratio of temperature gradient to solidification rate decreases. In addition, a large number of secondary dendrite arm fragments were also observed in the columnar crystals. The decrease in G/R together with the increase in constitutional undercooling and the fusion of dendrites promotes the columnar-to-equiaxed transition. The microstructure prediction map of TiAl alloys in dual-wire EBF 3 deepens the fundamental understanding of the correlaction of solidification parameters and microstructure in the micro-molten pool. The elucidation of the microstructure evolution mechanism of TiAl alloys in dual-wire EBF 3 provides an important theoretical basis for the future microstructure regulation.

In-situ observations of solidification process of Fe–Al–Ta eutectic alloy

Crystal growth mechanism of directionally solidified Fe–Al–Ta eutectic composites at higher solidification rates

High Temperature Tensile Property and Fracture Behavior of Directionally Solidified Fe-Al-Ta Eutectic Composites

Tensile and fatigue properties of the Bridgman directionally solidified Fe-Al-Ta eutectic

Microstructure and fracture toughness of the Bridgman directionally solidified Fe-Al-Ta eutectic at different solidification rates

Non-equilibrium solidification of bulk undercooled Ni–P eutectic alloys

Microstructure and solidification behaviour of Ni3Al/Ni7Hf2 eutectic alloy

High Temperature Oxidation Behavior of Directionally Solidified Fe(Al,Ta)/Fe2Ta(Al) Eutectic Composite

Structural phase transition in the Fe–Ta system studied by ion beam mixing

Mechanical properties of Fe-Al-Ta eutectic composites at higher solidification rates

Compressive Property and Toughening Mechanism of Directionally Solidified Fe(Al, Ta)/Fe2Ta (Al) Eutectic Composites

Metastable Phase Formation in Eutectic Solidification of Highly Undercooled Fe83B17 Alloy Melt

Directional Solidification and Microstructure Selection for Ti-Al Peritectic Alloy

In Situ Observation of Solidification of Undercooled Hypoeutectic Ni–Ni3B Alloy Melt

Thermal stability of Al–Fe–Ni alloy at high temperatures

In-Situ Observation of Ni-11.5wt%Si Eutectic Microstructure Evolution and Exploration of Strengthening Mode of Ni-Ni3si Eutectic Composites

Interface velocity dependent solute trapping and phase selection during rapid solidification of laser melted hypo-eutectic Al-11at.%Cu alloy

Microstructure selection during the directionally peritectic solidification of Ti–Al binary system

Microstructure Prediction Map and Microstructural Evolution in the Micro-Molten Pool of Tial Intermetallic Produced by Dual-Wire Electron Beam Freeform Fabrication

Influence of Al Content on Non-Equilibrium Solidification Behavior of Ni–Al–Ta Model Single Crystal Alloys

Solidification microstructure manipulation mechanism of hypoeutectic and hypereutectic Al-Si alloys controlled by trace in-situ nano-Fe 2 B and nano-Fe 3 Si