Abstract:Precipitation strengthening is recognized as an effective method for strengthening high-entropy alloys (HEAs) or medium-entropy alloys (MEAs), especially the recently developed CoCrFeNiTi HEA. The eta phase plays a crucial role in strengthening CoCrFeNiTix HEAs, though it remains relatively understudied. In this study, CoCrFeNiTi HEA was fabricated by laser directed energy deposition (LDED). The research investigated the effect of cooling rate on the precipitation behavior and fracture toughness of the eta phase in non-equilibrium solidified CoCrFeNiTi HEA. The findings revealed that the precipitation of the eta phase in the as-deposited LDED sample was restrained, resulting in a very low volume fraction. However, a high-volume-fraction eta phase was achieved through annealing at 900 degrees C for 6 h, followed by air cooling. This approach not only maintained the desired similar to 6.2 % volume fraction of the eta phase but also prevented its growth and coarsening (similar to 403 nm), resulting in an optimal combination of microstructure and mechanical properties. The eta phase exhibited the Blackburn type orientation relationship with the FCC phase: <11<(2)over bar>0>(eta)//<1<(1)over bar>0>FCC and {0001}(eta)//{111}(FCC). The L interface of the eta phase demonstrated a coherent relationship with the FCC phase ({0001}(eta)//{111}(FCC)), while the W interface was incoherent with the FCC phase ({11 (2) over bar0}(eta)//{1 (1) over bar0}(FCC)). The unique interface characteristics promoted a higher growth rate at the W interface compared to the L interface, leading to the preferred growth of the eta phase. The chemical compositions of both the FCC phase and eta phase were accurately predicted by experiments and simulations, elucidating the precipitation kinetics of the eta phase. When v >= v(WC), the nucleation and precipitation of the eta phase were inhibited. Conversely, when v <= v(FC), significant coarsening of the eta phase occurred. However, when v approximate to v(AC), the AC sample exhibited superior mechanical properties, with a microhardness of similar to 860 HV and excellent fracture toughness. These findings provide valuable insights and guidance for further enhancement and optimization of HEAs/MEAs strengthened by the eta phase.

Liquid metal embrittlement of a dual-phase Al0.7CoCrFeNi high-entropy alloy exposed to oxygen-saturated lead-bismuth eutectic

Liquid metal embrittlement susceptibility of an oxide-dispersion strengthened FeCrAl alloy in contact with liquid lead-bismuth eutectic at 350 °C

A comparative study on liquid metal embrittlement susceptibility of three FeCrAl ferritic alloys in contact with liquid lead-bismuth eutectic at 350°C

Temperature-dependent liquid metal embrittlement of Al 0.7 CoCrFeNi high-entropy alloys induced by equiatomic GaInSnZn melts

Effect of temperature on liquid metal embrittlement susceptibility of an Fe10Cr4Al ferritic alloy in contact with stagnant lead-bismuth eutectic

Intergranular precipitation-enhanced wetting and phase transformation in an Al0.4CoCrFeNi high-entropy alloy exposed to lead-bismuth eutectic

Liquid metal embrittlement of 12Cr ferritic/martensitic steel thin-walled tubes exposed to liquid lead-bismuth eutectic

Microstructural Evolution and Elevated-Temperature Strengthening Mechanism of Co-free FeCrMnNiV0.2Alx High-Entropy Alloys During Annealing

High corrosion resistance of twin boundaries in medium-entropy alloy exposed to liquid lead-bismuth eutectic at 500°C: mechanism exploration by both experiment and first-principles calculation

Liquid metal embrittlement and fracture behavior of three Mo metals in liquid lead-bismuth eutectic

Control of Nanoscale Precipitation and Elimination of Intermediate-Temperature Embrittlement in Multicomponent High-Entropy Alloys

Dissolution corrosion of FeCrAl alloy exposed to oxygen-depleted lead-bismuth eutectic containing Ni impurities at 600 °C

A Novel FeCrAlWx High Entropy Alloy Coating for Enhancing Lead-Bismuth Eutectic Corrosion Resistance

Early stages of liquid-metal embrittlement in an advanced high-strength steel

Oxidation and dissolution behavior of FeCrNiAl based high entropy alloy and alumina-forming austenitic steel exposed to lead-bismuth eutectic (LBE)

Sigma phase embrittlement in a tempered Fe 45 Cr 25 Ni 10 Mn 15 Al 4 C 1 medium-entropy alloy

Role of Aging Temperature on Thermal Stability of Co-free Cr0.8FeMn1.3Ni1.3 High-Entropy Alloy: Decomposition and Embrittlement at Intermediate Temperatures

Sigma Phase Embrittlement in a Tempered Fe45Cr25Ni10Mn15Al4C1 Medium-Entropy Alloy

Temperature-dependent mechanical behavior of an Al 0.5 Cr 0.9 FeNi 2.5 V 0.2 high-entropy alloy

Exceptional strength-ductility synergy at room and liquid nitrogen temperatures of Al7.5Co20.5Fe24Ni24Cr24 high-entropy alloy with hierarchical precipitate heterogeneous structure

The Effect of Cooling Rate on the Precipitation Behavior and Fracture Toughness of the Η Phase in Lded Cocrfeniti High-Entropy Alloy