Abstract:The major concern of the structure integrity of lead cooled reactor is the corrosion behavior of fuel cladding and other core internal materials. Magnetron sputtering technology is adopted as an surface coating method to improve the corrosion resistance of nuclear fuel cladding exposed to liquid lead-bismuth eutectic (LBE). Fe31Cr20Al17Ti16Nb16 high entropy alloy (HEA) coatings were prepared on tubular ferritic/martensitic (F/M) steel which is the candidate fuel cladding material, and the corrosion behaviors of Fe31Cr20Al17Ti16Nb16 coatings in LBE are investigated in this work. F/M steel specimens with Fe31Cr20Al17Ti16Nb16 coatings were exposed to 500 °C stagnant liquid LBE with oxygen concentration of Co ≈ 1 × 10−4 wt% and Co ≈ 1 × 10−7 wt% for 1000 h respectively. The primary findings suggest that the oxygen content of LBE mainly affects the morphology of duplex oxide layers generated during corrosion process, which resulting from the different inward diffusion flux of oxygen. In oxygen-saturated (Co ≈ 1 × 10−4 wt%) LBE, the overall oxide layer exhibits bulging and incompact morphology and infiltration of Pb is probed at inner Cr2O3 oxide layer, larger-sized cavities (the observed maximum dimension reaches 233.5 nm) distribute close to the outer Fe3O4/FeCr2O4 layer; In oxygen-depleted (Co ≈ 1 × 10−7 wt%) LBE, duplex oxide layer presents relatively dense and uniform state, tiny cavities (observed maximum dimension is 38.3 nm) dispersing at the internal of oxide areas. Corrosion rates of the Fe31Cr20Al17Ti16Nb16 coatings under two oxygen situations are 2 orders of magnitude lower than uncoated F/M steel under same exposure condition, the oxide layers with better uniformity and density produced in Co ≈ 1 × 10−7 wt% LBE indicating the better application advantage of Fe31Cr20Al17Ti16Nb16 coatings in oxygen-depleted LBE.

Oxidation behavior of ferritic/martensitic steels in stagnant liquid LBE saturated by oxygen at 600°C

Microstructural Evolution and Properties of Novel Ferritic Stainless Steel - Mox Prepared by Laser Melting Deposition

Performance of the new ferritic/martensitic steel SIMP against liquid lead‐bismuth eutectic corrosion: Comparison with T91 and 316L steels

Corrosion behavior and failure mechanism of amorphous Al2O3 coating at high-temperature LBE

Influence of temperature on the microstructural evolution of SIMP and T91 steels in liquid lead-bismuth eutectic: Experiments and molecular dynamics simulations

Corrosion behaviour of 11Cr1Si ferritic/martensitic steel in static liquid lead-bismuth eutectic at 450-550 °C

Study on Corrosion Behavior of China low activation Ferritic/martensitic Steel in Static Liquid Lithium

Corrosion Kinetics and Mechanisms of 15-15Ti Steel in Flowing Liquid Lead-Bismuth Eutectic at 500°C

Study on the corrosion behavior of austenitic stainless 15-15Ti for nuclear fuel cladding in lead-bismuth eutectic alloy with oxygen control

Corrosion behavior of magnetron sputtering Fe31Cr20Al17Ti16Nb16 high entropy coating in liquid lead-bismuth eutectic with different oxygen concentration at 500 °C

Comparison investigation on corrosion of SIMP and T91 exposed to liquid LBE at 450°C: the role of Si on reducing oxidation rate

Corrosion kinetics of T91 steel under low oxygen conditions (10 −7 wt% O) in lead-bismuth eutectic at 500 °C

Corrosion Kinetics of T91 Steel under Low Oxygen Conditions (10-7 Wt% O) in Lead-Bismuth Eutectic at 500 ºc

Corrosion of F/M steels and austenitic steels in Pb-Mg at different temperatures

Long-Term Behaviors of Oxide Layer in Liquid Lead–Bismuth Eutectic (LBE), Part II: Model Applications

Wetting property of liquid Pb on different steel candidates as structural materials for the Generation IV nuclear reactors

Preliminary Characterization of Alumina-Forming Austenitic–Type Advanced Alloys as Structural Materials for LFRs

Study on the Corrosion Behavior of Aluminum Reinforced Austenitic Steel in Liquid Lead Bismuth at 550 °C

New insights into the oxidation mechanisms of a Ferritic-Martensitic steel in high-temperature steam

Revealing the Oxidation Mechanism of Ferritic Heat Resistant Steel in High-Temperature Flue Gas

Insight into the fretting corrosion behavior of 316L steel in liquid lead-bismuth eutectic at 500°C