Abstract:The process route and the microstructure of medium‐entropy dual‐phase (boride and carbide based) ceramic are introduced. Hf–,Zr–,Ti‐based diboride and monocarbide powders are mixed in varied combinations, ball‐milled and then densified by SPS to obtain bulk medium‐entropy ceramics. In contrast to mono‐phase ceramics, dual‐phase ceramics, especially 67MEB‐33MEC, exhibit high fracture toughness due to a high number of crack deflection and crack bridging toughening mechanisms. Material scientists constantly look for new compounds with exceptional properties to meet the ever‐changing technology and industry needs. Hereby, the dual‐phase medium‐entropy ceramics have fabricated by employing high‐energy ball milling (HEBM) and spark plasma sintering (SPS) techniques on commercial boride and carbide powders of IVB group metals. The boride and carbide powders have undergone 3‐hour milling in a planetary ball mill, followed by SPS processing at 1800°C and 2000°C under 30 MPa uniaxial pressure for 10 min. The milled powders and SPS'ed ceramics have been characterized, focusing on composition, density, and microstructure using X‐ray diffractometry (XRD) and scanning electron microscopy (SEM)/energy dispersive spectroscopy (EDS). Microhardness and sliding wear tests have also been performed on the SPS'ed ceramics. The systematic analysis of the characterization results has revealed that the microstructural evolution and mechanical properties of the dual‐phase ceramics have developed to a comparable level with the single‐phase ceramics, regardless of the sintering temperature. In fact, the dual‐phase ceramics sintered at 1800°C come to the forefront due to the superior hardness and fracture toughness values (∼ 16 GPa and ∼ 5.4 MPa.m1/2).

Single-phase W 2 B 5 ceramic enabled remarkable performance via spark plasma sintering-high-frequency (SPS-HF) process

Preparation of dense B4C ceramics by spark plasma sintering of high-purity nanoparticles

Processing and mechanical properties of B4C-SiCw ceramics densified by spark plasma sintering

Processing and Mechanical Properties of Zirconium Diboride‐Based Ceramics Prepared by Spark Plasma Sintering

Synthesis and Microstructure Evolution of WCoB Based Cermets During Spark Plasma Sintering

Densification and strengthening mechanism in spark plasma sintering of B4C–VB2 ceramics via carbide boronizing

Extraordinary High-Temperature Mechanical Properties in Binder-Free Nanopolycrystalline WC Ceramic

Densification, microstructure and properties of ultra-high temperature HfB2 ceramics by the spark plasma sintering without any additives

Mechanical characteristics of dual‐phase medium‐entropy boride/carbide ceramics synthesized through SPS

Spark plasma sintering and hot pressing of ZrB2–SiCW ultra-high temperature ceramics

Dissolving and Stabilizing Soft WB2 and MoB2 Phases into High-Entropy Borides via Boron-Metals Reactive Sintering to Attain Higher Hardness

Exceptional hardness and thermal properties of SiC/(Hf,Ta)C(N)/ (B)C ceramic composites derived from single‐source precursor

A novel high-entropy monoboride (Mo0.2Ta0.2Ni0.2Cr0.2W0.2)B with superhardness and low thermal conductivity

Physical and mechanical properties of hexagonal boron nitride ceramic fabricated by pressureless sintering without additive

Low temperature sintering of Hf0.95Nb0.05B2-based ceramics with submicron-scaled grains and enhanced mechanical properties

Mechanical properties and microstructure of laminated Si3N4+SiCw/BN+Al2O3 ceramics densified by spark plasma sintering

Influence of molten-salt-synthesised high-entropy (V0.2Cr0.2Mo0.2W0.2Ni0.2)B powder characteristics on superhard mechanism during spark plasma sintering

Sintering pure polycrystalline boron carbide bulks with enhanced hardness and toughness under high pressure

B4C-based hard and tough ceramics densified via spark plasma sintering using a novel Mg2Si sintering aid

The microstructural evolution, mechanical and dielectric properties of BNW/SiO2 ceramics

A super‐hard high entropy boride containing Hf, Mo, Ti, V, and W