Abstract:The process route and the microstructure of medium‐entropy dual‐phase (boride and carbide based) ceramic are introduced. Hf–,Zr–,Ti‐based diboride and monocarbide powders are mixed in varied combinations, ball‐milled and then densified by SPS to obtain bulk medium‐entropy ceramics. In contrast to mono‐phase ceramics, dual‐phase ceramics, especially 67MEB‐33MEC, exhibit high fracture toughness due to a high number of crack deflection and crack bridging toughening mechanisms. Material scientists constantly look for new compounds with exceptional properties to meet the ever‐changing technology and industry needs. Hereby, the dual‐phase medium‐entropy ceramics have fabricated by employing high‐energy ball milling (HEBM) and spark plasma sintering (SPS) techniques on commercial boride and carbide powders of IVB group metals. The boride and carbide powders have undergone 3‐hour milling in a planetary ball mill, followed by SPS processing at 1800°C and 2000°C under 30 MPa uniaxial pressure for 10 min. The milled powders and SPS'ed ceramics have been characterized, focusing on composition, density, and microstructure using X‐ray diffractometry (XRD) and scanning electron microscopy (SEM)/energy dispersive spectroscopy (EDS). Microhardness and sliding wear tests have also been performed on the SPS'ed ceramics. The systematic analysis of the characterization results has revealed that the microstructural evolution and mechanical properties of the dual‐phase ceramics have developed to a comparable level with the single‐phase ceramics, regardless of the sintering temperature. In fact, the dual‐phase ceramics sintered at 1800°C come to the forefront due to the superior hardness and fracture toughness values (∼ 16 GPa and ∼ 5.4 MPa.m1/2).

Mechanical characteristics of dual‐phase medium‐entropy boride/carbide ceramics synthesized through SPS

Synergistic hardening in a dual phase high‐entropy (Hf,Nb,Ta,Ti,Zr)C–(Hf,Nb,Ta,Ti,Zr)B2 ultra‐high temperature ceramic

Thermophysical and mechanical properties of dual-phase medium- and high-entropy rare-earth zirconate ceramics

Single-phase W 2 B 5 ceramic enabled remarkable performance via spark plasma sintering-high-frequency (SPS-HF) process

Fine-grained dual-phase high-entropy ceramics derived from boro/carbothermal reduction

Wear characteristics of dual‐phase high‐entropy ceramics: Influence of the testing method

Ultra-fast high-temperature synthesis and densification of high-entropy diborides and diboride-carbide ceramics

Optimal preparation of high-entropy boride-silicon carbide ceramics

Mechanical properties of hot-pressed high-entropy diboride-based ceramics

Dissolving and Stabilizing Soft WB2 and MoB2 Phases into High-Entropy Borides via Boron-Metals Reactive Sintering to Attain Higher Hardness

Microstructure and Mechanical Properties of ZrB2/h-BN Multiphase Ceramics by Low-Temperature Reactive Sintering

Sintering pure polycrystalline boron carbide bulks with enhanced hardness and toughness under high pressure

Synthesis and Characterization of High-Purity, High-Entropy Diboride Ceramic Powders by a Liquid Phase Method

High-Entropy Diborides—Silicon Carbide Composites by Reactive and Non-Reactive Spark Plasma Sintering: A Comparative Study

Effect of SiC on Microstructure, Phase Evolution, and Mechanical Properties of Spark-Plasma-Sintered High-Entropy Ceramic Composite

Low-temperature synthesis and mechanical performance analysis of single-phase high-entropy (Ti,Cr,V,Nb,Ta)B 1.9 ceramics

Microstructures and mechanical properties of high-entropy (Ti0.2Zr0.2Hf0.2Nb0.2Ta0.2)C ceramics with the addition of SiC secondary phase

Highly wear resistant dual-phase (Ti-Zr-Nb-Hf-Ta)C/(Ti-Zr-Nb-Hf-Ta) B2 high-entropy ceramics

Microstructure and mechanical properties of spark plasma sintered SiC ceramics aided by B4C

Methods to improve mechanical characteristics of ceramics on the basis of zirconium and hafnium diborides (Review)

Dense and pure high-entropy metal diboride ceramics sintered from self-synthesized powders via boro/carbothermal reduction approach