Abstract:While the use of low-melting-point metals as sintering aids for high-entropy carbide (HEC) ceramics has been well established, their existence can compromise hardness due to residual metallic inclusions. This study demonstrates an innovative strategy to meet this challenge, where (Ti,Zr,Nb,Ta,Mo)C high-entropy carbide ceramics with ultrafine grains and enhanced hardness are obtained through chromium (Cr)-metal-assisted spark plasma sintering (SPS) at a temperature as low as 1600 degrees C. The results show that the addition of 5 vol% Cr promotes the formation of highly densified single HEC phase ceramics with a high relative density (98.4%) and an ultrafine-grained microstructure (0.17 mu m). This low-temperature densification mechanism can be attributed to Cr's solid-solution effect within the matrix and the increased carbon vacancies generated during sintering. The grain size of the (Ti,Zr,Nb,Ta,Mo)C ceramics with 5 vol% Cr metal addition is significantly smaller than that of Cr-free (Ti,Zr,Nb,Ta,Mo)C ceramics sintered at 2000 degrees C (3.03 mu m) or via traditional low-temperature liquid-phase sintering (1.3-1.5 mu m). Importantly, the addition of 5 vol% Cr substantially increased the hardness of the ceramics, with a remarkable increase from 23.57 to 28.16 GPa compared to that of the pure (Ti,Zr,Nb,Ta,Mo)C ceramics, owing to the fine-grain strengthening and solid-solution strengthening mechanisms. This work highlights the uniqueness of Cr metal as a sintering aid in achieving densification and hardness improvements in (Ti,Zr,Nb,Ta,Mo)C ceramics, offering a promising strategy for improving the properties of HEC materials for further development in the near future.

Ultra-fast high-temperature synthesis and densification of high-entropy diborides and diboride-carbide ceramics

Rapid liquid phase-assisted ultrahigh-temperature sintering of high-entropy ceramic composites

Dense and pure high-entropy metal diboride ceramics sintered from self-synthesized powders via boro/carbothermal reduction approach

Ultrastrong and High Thermal Insulating Porous High‐Entropy Ceramics up to 2000°C

Low-temperature densification of high entropy diboride based composites with fine grains and excellent mechanical properties

Unrevealing hardening and strengthening mechanisms in high-entropy ceramics from lattice distortion

Synergistic hardening in a dual phase high‐entropy (Hf,Nb,Ta,Ti,Zr)C–(Hf,Nb,Ta,Ti,Zr)B2 ultra‐high temperature ceramic

Reactive Sintering of Dual-Phase High-Entropy Ceramics with Superior Mechanical Properties

Optimal preparation of high-entropy boride-silicon carbide ceramics

Ultrafast high-temperature sintering of barium titanate ceramics with colossal dielectric constants

Ultrafast synthesis and pressureless densification of multicomponent nitride and carbonitride ceramics

Mechanical properties of hot-pressed high-entropy diboride-based ceramics

Ultrafast high-temperature sintering of bulk oxides

Enhancing densification rate and the unusual 4H-SiC polytype stabilization in ultrafast high-temperature sintering of α-SiC

Synthesis and Characterization of High-Purity, High-Entropy Diboride Ceramic Powders by a Liquid Phase Method

High‐pressure sintering of ultrafine‐grained high‐entropy diboride ceramics

Cr-assisted Low-Temperature Densification of (ti,zr,nb,ta,mo)c High-Entropy Carbides with Ultrafine Grain and Enhanced Hardness

Densification, microstructure and properties of ultra-high temperature HfB2 ceramics by the spark plasma sintering without any additives

Progress in densification and toughening of high entropy carbide ceramics

Reactive sintered dense carbon fiber reinforced high‐entropy boride composite using high‐entropy silicide as reactant

Rapid densification and mechanical properties of ultra-high-pressure sintered transition metal carbide ceramics