Abstract:Ultra-high temperature ceramic composites have been widely investigated due to their improved sinterability and superior mechanical properties compared to monolithic ceramics. In this work, high-entropy boron-carbide ceramic/SiC composites with different SiC content were synthesized from multicomponent carbides HfC, Mo2C, TaC, TiC, B4C, and SiC in spark plasma sintering (SPS) from 1600 °C to 2000 °C. It was found that the SiC addition tailors the phase formation and mechanical properties of the high-entropy ceramic (HEC) composites. The microhardness and fracture toughness of the HEC composites sintered at 2000 °C were improved from 20.3 GPa and 3.14 MPa·m1/2 to 26.9 GPa and 5.95 MPa·m1/2, with increasing SiC content from HEC-(SiC)0 (0 vol. %) to HEC-(SiC)3.0 (37 vol. %). The addition of SiC (37 vol. %) to the carbide precursors resulted in the formation of two high-entropy ceramic phases with two different crystal structures, face-centered cubic (FCC) structure, and hexagonal structure. The volume fraction ratio between the hexagonal and FCC high-entropy phases increased from 0.36 to 0.76 when SiC volume fraction was increased in the composites from HEC-(SiC)0 to HEC-(SiC)3.0, suggesting the stabilization of the hexagonal high-entropy phase over the FCC phase with SiC addition.

Densification, microstructure and properties of ultra-high temperature HfB2 ceramics by the spark plasma sintering without any additives

Low temperature sintering of Hf0.95Nb0.05B2-based ceramics with submicron-scaled grains and enhanced mechanical properties

Dense HfB2 ceramics fabricated by high-energy ball milling and spark plasma sintering

Microstructure evolution of ultra-fine grained HfC ceramics with high hardness sintered under ultrahigh pressure by plastic deformation densification mechanism

Low-temperature densification of high entropy diboride based composites with fine grains and excellent mechanical properties

Strengthening Hf0.95Ta0.05B2 Ceramic With Ultrafine Grains and High-density Dislocations

Pressureless densification of HfB2-based ceramics using HfB2 powders by borothermal reduction

Densification, microstructure, and mechanical properties of V-substituted HfB2-based ceramics

Densification and grain growth kinetics of boron carbide powder during ultrahigh temperature spark plasma sintering

Spark plasma sintering and hot pressing of ZrB2–SiCW ultra-high temperature ceramics

Ultra-fast high-temperature synthesis and densification of high-entropy diborides and diboride-carbide ceramics

Densification and microstructure evolution of W-TiC-Y2O3 during spark plasma sintering

Densification mechanism, microstructure and mechanical properties of ZrC ceramics prepared by high-pressure spark plasma sintering

Effect of SiC on Microstructure, Phase Evolution, and Mechanical Properties of Spark-Plasma-Sintered High-Entropy Ceramic Composite

The Structure and Properties of the Promising Ultra-High-Temperature HfB2–HfC–SiC Ceramics Obtained from Heterophase SHS Powders

Ultrafast high-temperature sintering of barium titanate ceramics with colossal dielectric constants

Single-phase W 2 B 5 ceramic enabled remarkable performance via spark plasma sintering-high-frequency (SPS-HF) process

Rapid densification and mechanical properties of ultra-high-pressure sintered transition metal carbide ceramics

High‐pressure sintering of ultrafine‐grained high‐entropy diboride ceramics

Dense (Hf0.2Mo0.2Ta0.2Nb0.2Ti0.2)B2 ceramics prepared by pressureless sintering with Ni additives

Enhancing densification rate and the unusual 4H-SiC polytype stabilization in ultrafast high-temperature sintering of α-SiC