Abstract:Zirconia ceramics exhibits high functional and strength properties. The range of its application is continuously expanding. The use of nanopowders makes it possible to obtain fine-grained ceramics with improved characteristics. Zirconium dioxide has a high hardness, which ensures increased mold wear. In addition, nanoparticles are prone to agglomeration, which affects compaction upon pressing and sintering. These problems can be solved by introducing microadditives, e.g., carbon. The effect of the type and concentration of a carbon additive on the parameters of zirconia ceramics fabricated from powder raw materials synthesized by sol‒gel and plasma-chemical methods has been explored. The shrinkage of the ceramic samples of two types with carbon additives of three types (multiwalled carbon nanotubes (MWNTs), amorphous carbon, and amorphous carbon with MWCNTs) has been studied by dilatometry. It has been established that the additives do not affect the shrinkage rate and that the highest rate of shrinkage of the sample is almost equal to the shrinkage rate upon sintering of the ceramics without additives. The effect of a carbon additive on the density and microhardness of the ceramics has been determined. It is shown that the additives introduced into the ceramics fabricated from the powders synthesized by the sol‒gel technology reduce the density and microhardness, while the density of the ceramics made of the plasma-chemical powders increases up to a certain additive concentration threshold for carbon of all the types discussed in this study.

Methods to improve mechanical characteristics of ceramics on the basis of zirconium and hafnium diborides (Review)

Processing and Mechanical Properties of Zirconium Diboride‐Based Ceramics Prepared by Spark Plasma Sintering

Processing and Mechanical Properties of Short Carbon Fibers Toughened Zirconium Diboride-Based Ceramics

Electrostatic Assembly Preparation of High-Toughness Zirconium Diboride-Based Ceramic Composites with Enhanced Thermal Shock Resistance Performance

Spark plasma sintering and hot pressing of ZrB2–SiCW ultra-high temperature ceramics

Synergistic Toughening Effect of SiC Whiskers and Particles in ZrO2–Al2O3–SiC Ceramics

Effects of Short Carbon Fiber on Mechanical Properties of ZrB2-SiC Ultra-high Temperature Ceramics

Influence of bismuth oxide as a sintering aid on the densification of cold sintering of zirconia

Effects of SiC Platelet and ZrSi2 Additive on Sintering and Mechanical Properties of ZrB2-based Ceramics by Hot-Pressing

[Effect of Two-Step Sintering Method on Properties of Zirconia Ceramic].

Zirconia Ceramics Consolidated by Oscillatory Pressure Sintering and Subsequent Carburization

Microstructures and Mechanical Properties of ZrB2–SiC–Ni Ceramic Composites Prepared by Spark Plasma Sintering

Preparation of Zirconia Ceramics by Spark Plasma Sintering Technique and Their Mechanical Properties

Preparation and Mechanical Properties of ZrB2-based Ceramics Using MoSi2 As Sintering Aids

The Effect of a Carbon Additive on Compaction of Partially Stabilized Zirconia Powders upon Pressing and Sintering

Preparation, mechanical properties, and toughening mechanisms of SiCw/SiCp‐reinforced zirconia‐toughened alumina ceramics

Mechanical Properties of ZrB<sub>2</sub>-Based Ceramics Reinforced by Nano-SiC Whiskers

Synergistic strengthening and toughening of oscillatory pressure sintered WC-ZrO2-Al2O3 ceramics

Effect of Nano SiC on Microstructure and Mechanical Properties of BN-ZrO2-SiC Multiphase Ceramics

The influence of zirconium dioxide nanoadditives on the properties of mullite-corundum

Microstructure and properties of silicon carbide whisker reinforced zirconium diboride ultra-high temperature ceramics