Abstract:Seven equimolar, five-component, metal diborides were fabricated via high-energy ball milling and spark plasma sintering. Six of them, including (Hf0.2Zr0.2Ta0.2Nb0.2Ti0.2)B2, (Hf0.2Zr0.2Ta0.2Mo0.2Ti0.2)B2, (Hf0.2Zr0.2Mo0.2Nb0.2Ti0.2)B2, (Hf0.2Mo0.2Ta0.2Nb0.2Ti0.2)B2, (Mo0.2Zr0.2Ta0.2Nb0.2Ti0.2)B2, and (Hf0.2Zr0.2Ta0.2Cr0.2Ti0.2)B2, possess virtually one solid-solution boride phase of the hexagonal AlB2 structure. Revised Hume-Rothery size-difference factors are used to rationalize the formation of high-entropy solid solutions in these metal diborides. Greater than 92% of the theoretical densities have been generally achieved with largely uniform compositions from nanoscale to microscale. Aberration-corrected scanning transmission electron microscopy (AC STEM), with high-angle annular dark-field and annular bright-field (HAADF and ABF) imaging and nanoscale compositional mapping, has been conducted to confirm the formation of 2-D high-entropy metal layers, separated by rigid 2-D boron nets, without any detectable layered segregation along the c-axis. These materials represent a new type of ultra-high temperature ceramics (UHTCs) as well as a new class of high-entropy materials, which not only exemplify the first high-entropy non-oxide ceramics (borides) fabricated but also possess a unique non-cubic (hexagonal) and layered (quasi-2D) high-entropy crystal structure that markedly differs from all those reported in prior studies. Initial property assessments show that both the hardness and the oxidation resistance of these high-entropy metal diborides are generally higher/better than the average performances of five individual metal diborides made by identical fabrication processing.

A super‐hard high entropy boride containing Hf, Mo, Ti, V, and W

High-Entropy Monoborides: Towards Superhard Materials

Dissolving and Stabilizing Soft WB2 and MoB2 Phases into High-Entropy Borides via Boron-Metals Reactive Sintering to Attain Higher Hardness

A novel high-entropy monoboride (Mo0.2Ta0.2Ni0.2Cr0.2W0.2)B with superhardness and low thermal conductivity

Synergistic hardening in a dual phase high‐entropy (Hf,Nb,Ta,Ti,Zr)C–(Hf,Nb,Ta,Ti,Zr)B2 ultra‐high temperature ceramic

High-pressure high-temperature synthesis and thermal equation of state of high-entropy transition metal boride

First-principles prediction, fabrication and characterization of (Hf0.2Nb0.2Ta0.2Ti0.2Zr0.2)B2 high-entropy borides

High-Entropy Metal Diborides: A New Class of High-Entropy Materials and a New Type of Ultrahigh Temperature Ceramics

Is Orthorhombic Iron Tetraboride Superhard?

Hardness of single phase high entropy carbide ceramics with different compositions

Design of superhard high-entropy diborides v i a high-throughput DFT and thermodynamics calculations

Influence of molten-salt-synthesised high-entropy (V0.2Cr0.2Mo0.2W0.2Ni0.2)B powder characteristics on superhard mechanism during spark plasma sintering

Mechanical, Thermal Properties, and Extreme Phase Stability of High-Entropy Diborides (V0.2Nb0.2Ta0.2Cr0.2W0.2)B2

Dense and pure high-entropy metal diboride ceramics sintered from self-synthesized powders via boro/carbothermal reduction approach

Synthesis and Thermal Oxidation Resistance of Boron-Rich Boron-Carbide Material

Single-phase W 2 B 5 ceramic enabled remarkable performance via spark plasma sintering-high-frequency (SPS-HF) process

Low-temperature synthesis and mechanical performance analysis of single-phase high-entropy (Ti,Cr,V,Nb,Ta)B 1.9 ceramics

Exceptional hardness and thermal properties of SiC/(Hf,Ta)C(N)/ (B)C ceramic composites derived from single‐source precursor

Study on microstructure, mechanical properties and thermal performance of single-phase (Ti,Zr,Hf)B 2 solid solution

Metal deficient AlB$_{2}$-type (Ti$_{0.2}$Zr$_{0.2}$Hf$_{0.2}$Nb$_{0.2}$Ta$_{0.2}$)$_{1-δ}$B$_{2}$ high-entropy diborides with high hardness

Dense nine elemental high entropy diboride ceramics with unique high temperature mechanical and physical properties