Abstract:Micro relative sliding exists on the contact surface of the main primary equipment's surface structures, resulting in serious fretting fatigue. The plastic effect causes serious fatigue to the structure under alternating loads. Existing fatigue life prediction models fail to fully consider the shortcomings of fretting and plastic effects, which causes the prediction results to be significantly different to real-lifeworld in engineering situations. Therefore, it is urgent to establish a fretting damage fatigue life prediction model of contact structures which considers plastic effects. In this study, a plastic fretting fatigue life prediction model was established according to the standard structural contact theory. The location of dangerous points was evaluated according to a finite element simulation. The cyclic load maximum stress value was compared with the fretting fatigue test data to confirm the error value, and the error between the proposed fretting fatigue life model and the test value was within 15%. Concurrently, we combined this with mass data analysis and research, as it is known that the contact zone parameters have an impact on fretting fatigue and affect the structural lifespan. With the help of ABAQUS, the fretting numerical calculation of the dovetail tenon model was carried out to analyze the sensitive factors affecting the fretting fatigue life of the dovetail tenon structure. By keeping the fretting load unchanged, the contact area parameters such as contact surface form, contact area width and friction coefficient were changed in order to calculate the fretting stress value, σfretting and the dovetail structure was improved to extend its fretting fatigue life. Finally, it was concluded that fretting fatigue was most sensitive to the width and contact form of the contact area. In actual engineering design, multiple factors should be considered comprehensively to determine a more accurate and suitable width and form of the contact area. For the selection of friction coefficient, on the premise of saving costs and meeting the structural strength requirements, the friction coefficient should be as small as possible, and the problem can also be solved through lubrication during processing.

Prediction of plastic gears fatigue life considering the effect of temperature

A Model for Ultra Low Cycle Fatigue Damage Prediction of Structural Steel

Study on the Prediction Method of the Ultra-Low-Cycle Fatigue Damage of Steel

A New Approach to Low-Cycle Fatigue Damage Based on Exhaustion of Static Toughness and Dissipation of Cyclic Plastic Strain Energy During Fatigue

A New Empirical Life Prediction Model For 9-12%Cr Steels Under Low Cycle Fatigue And Creep Fatigue Interaction Loadings

Continuum Damage Mechanics Based Fatigue Life Prediction and Fatigue Property Analysis of Pitting Corrosion Steel Bars

Thermal-mechanical fatigue life prediction considering fatigue-creep interaction effects

Prediction of long-term fatigue life of CFRP composite hydrogen storage vessel based on micromechanics of failure

Gear bending fatigue life prediction based on continuum damage mechanics and linear elastic fracture mechanics

Data-driven approach to very high cycle fatigue life prediction

A Robust Life Prediction Model for a Range of Materials under Creep-Fatigue Interaction Loading Conditions

A numerical model for total bending fatigue life estimation of carburized spur gears considering the hardness gradient and residual stress

Lifetime prediction of time-dependent thermomechanical fatigue of high temperature alloys

Probabilistic gear fatigue life prediction based on physics-informed transformer

Experimental study of fretting fatigue in dovetail assembly considering temperature effect based on damage mechanics method

A CDM model for remaining fatigue-lifetime prediction of ductile metals

A novel prediction approach of polymer gear contact fatigue based on a WGAN‐XGBoost model

Fretting Fatigue Life Prediction of Dovetail Structure Based on Plastic Effect and Sensitivity Analysis of Influencing Factors

An energy-CP-combined model for predicting the fatigue life of polycrystalline materials under high cycle and very high cycle fatigue

A unified model for bending fatigue life prediction of surface-hardened gears

Fatigue life prediction model of metallic materials considering crack propagation and closure effect