Abstract:Surface wear, as a major failure mode of gear systems, is an unavoidable phenomenon during the whole life of gears. It also induces other gear damages, such as fatigue cracks, surface pitting and spalling. Ultimately, those defects may result in the sudden failure of a gearbox transmission system, which can lead to a serious accident and unexpected economic loss. Therefore, it can provide huge cost and safety benefits to industries to monitor gear wear and predict its propagation. Gear wear raises the error rate of gear transmission systems, typically leading to improvements in dynamic loads, vibration, and noise. In return, the increased load conversely aggravates wear, creating a feedback cycle between dynamic responses and surface wear. For this purpose, a wear prediction model was incorporated into a tribo-dynamic model for quantitatively investigating how surface wear and gear vibration are mutually affected by each other. To obtain more precise dynamic responses, the tribo-dynamic model integrates the time-varying mesh stiffness, load-sharing ratio and friction parameters. To improve the computational efficiency and guarantee the calculation precision, an improved and updated wear depth methodology is constructed in the wear prediction model. This paper demonstrates the capability of the proposed dynamic wear prediction model in the investigation of the interaction effects between gear dynamics and surface wear, allowing for the development of improved gear wear prediction tools. The obtained results indicate that the surface wear impacts the dynamic characteristics, even with slight wear. In the initial stage of wear, the friction coefficient decreases slightly, largely due to the reduction in surface roughness; but the friction force increases because of the improved dynamic meshing force. Although the initial wear depth distributions of a pinion under dynamic and static conditions are similar, the wear depth distributions under dynamic conditions becomes significantly different compared to the those under static conditions with the wear process. The maximum wear depth of a pinion under dynamic conditions is about 1.6 times as the corresponding static conditions, when the wear cycle comes to . Similarly, the maximum accumulative wear depth of a pinion under dynamic conditions reaches 1.2 times of that under static conditions. Therefore, the proposed dynamic wear prediction model is more appropriate to be applied to the surface wear of gears.

A novel prediction approach of polymer gear contact fatigue based on a WGAN‐XGBoost model

Probabilistic gear fatigue life prediction based on physics-informed transformer

A Contact Mechanics Model for Surface Wear Prediction of Parallel-Axis Polymer Gears

A Computational Model for Analysing the Dry Rolling/Sliding Wear Behaviour of Polymer Gears Made of POM

A unified estimation method for gear fatigue P-S-N curves and fatigue limits based on ensemble learning and data augmentation

Prediction of plastic gears fatigue life considering the effect of temperature

Experimental Analysis and Wear Prediction Model for Unfilled Polymer–Polymer Sliding Contacts

A novel gear RUL prediction method by diffusion model generation health index and attention guided multi-hierarchy LSTM

The wear resistance improvement of fibre reinforced polymer composite gears

Data-driven approach to very high cycle fatigue life prediction

Computational Model for Analysing the Tooth Deflection of Polymer Gears

A method for gear fatigue life prediction considering the internal flow field of the gear pump

Probabilistic Fatigue Life Prediction for CSS-42L Bearing in Jet Strengthen Modification Grinding using an improved WTP Network

Life prediction for rate-dependent low-cycle fatigue of PA6 polymer considering ratchetting: Semi-empirical model and neural network based approach

Conceptual design and optimization of polymer gear system for low-thrust turbofan aeroengine accessory transmission

Prediction of wear of short glass fiber reinforced polyamide 66 composite sprocket

Gear Wear Prediction Based on the Theorem of Degradation Entropy Generation

A Novel Multi-Objective Dynamic Reliability Optimization Approach for a Planetary Gear Transmission Mechanism

A Dynamic Wear Prediction Model for Studying the Interactions between Surface Wear and Dynamic Response of Spur Gears

A life-cycle dynamic wear degradation model of planetary gear systems

A novel vibration-based prognostic scheme for gear health management in surface wear progression of the intelligent manufacturing system