Abstract:A numerical model for determination the gear tooth root fatigue behaviour is presented. Two cases are being explored, first in which gear tooth was loaded with normal pulsating force acting at the highest point of single tooth contact, and second in which the fact that in actual gear operation the magnitude as well as the position of the force changes as the gear rotates through the mesh is taken into account. The fatigue process leading to tooth breakage is divided into crack initiation and crack propagation period. The critical plane damage model has been used to determine the number of stress cycles required for the fatigue crack initiation. The critical plane methods predict not only fatigue crack initiation life, but also the initiated crack direction, which makes a good starting point for further fatigue crack propagation studies. Finite element method and linear elastic fracture mechanics theories are then used for the further simulation of the fatigue crack growth under a moving load. Moving load produces a non-proportional load history in a gear's tooth root. Consequently, the maximum tangential stress theory will predict a unique kink angle for each load increment, but herein crack’ s trajectory is computed at the end of the load cycle. An approach that accounts for fatigue crack closure effects is developed to propagate crack under non-proportional load. The total number of stress cycles for the final failure to occur is then a sum of stress cycles required for the fatigue crack initiation and number of loading cycles for crack propagation from the initial to the critical length. Although some influences (non-homogeneous material, traveling of dislocations, etc.) were not taken into account in the computational simulations, the presented model seems to be very suitable for determination of service life of gears because numerical procedures used here are much faster and cheaper if compared with the experimental testing.

A numerical model for total bending fatigue life estimation of carburized spur gears considering the hardness gradient and residual stress

A unified model for bending fatigue life prediction of surface-hardened gears

Gear bending fatigue life prediction based on continuum damage mechanics and linear elastic fracture mechanics

Prediction of bending fatigue life for gears based on dynamic load spectra

An Experimental Study on the Accuracy of Cumulative Damage Models in Gear Tooth Bending Fatigue

Gear Tooth Root Fatigue Behaviour

Gear fatigue crack prognosis using embedded model, gear dynamic model and fracture mechanics

Gear Tooth Root Crack Path and Fatigue Life

Analysis of Tooth Root Crack Initiation, Propagation and Fracture Surface Based on Gear Bending Fatigue Test

Modeling and Fatigue Characteristic Analysis of the Gear Flexspline of a Harmonic Reducer

A life prediction model for rolling contact fatigue based on the improved moment of load path method

Contact fatigue life prediction of a bevel gear under spectrum loading

Residual stresses in gear form grinding by considering carburizing heat treatment: multi-field coupled numerical simulation and experimental verification

Very High Cycle Fatigue Failure Analysis and Life Prediction of Cr-Ni-W Gear Steel Based on Crack Initiation and Growth Behaviors

Spur Gears Static and Dynamic Meshing Simulation and Tooth Stress Calculation

A fatigue life prediction approach to interior cracking induced high cycle and very high cycle fatigue for surface‐carburized steels

Mesh Stiffness Modeling and Dynamic Simulation of Spur Gears with Body Crack under Speed Fluctuation Condition

Crack Propagation in the Spur Gear of Tubler Gear Mechanism of Lathe Machine

A double-layer iterative analytical model for mesh stiffness and load distribution of early-stage cracked gear based on the slicing method

Numerical prediction of fretting fatigue crack growth in scaled railway axles considering fretting wear evolution

Investigation of Crack Propagation Behaviour in Thin-Rim Gears: Experimental Tests and Numerical Simulations