Abstract:A numerical model for determination the gear tooth root fatigue behaviour is presented. Two cases are being explored, first in which gear tooth was loaded with normal pulsating force acting at the highest point of single tooth contact, and second in which the fact that in actual gear operation the magnitude as well as the position of the force changes as the gear rotates through the mesh is taken into account. The fatigue process leading to tooth breakage is divided into crack initiation and crack propagation period. The critical plane damage model has been used to determine the number of stress cycles required for the fatigue crack initiation. The critical plane methods predict not only fatigue crack initiation life, but also the initiated crack direction, which makes a good starting point for further fatigue crack propagation studies. Finite element method and linear elastic fracture mechanics theories are then used for the further simulation of the fatigue crack growth under a moving load. Moving load produces a non-proportional load history in a gear's tooth root. Consequently, the maximum tangential stress theory will predict a unique kink angle for each load increment, but herein crack’ s trajectory is computed at the end of the load cycle. An approach that accounts for fatigue crack closure effects is developed to propagate crack under non-proportional load. The total number of stress cycles for the final failure to occur is then a sum of stress cycles required for the fatigue crack initiation and number of loading cycles for crack propagation from the initial to the critical length. Although some influences (non-homogeneous material, traveling of dislocations, etc.) were not taken into account in the computational simulations, the presented model seems to be very suitable for determination of service life of gears because numerical procedures used here are much faster and cheaper if compared with the experimental testing.

Analysis of Tooth Root Crack Initiation, Propagation and Fracture Surface Based on Gear Bending Fatigue Test

Gear Tooth Root Crack Path and Fatigue Life

Effect of Initial Crack Position on Crack Propagation Behaviors of Heavy-Duty Transmission Gear

Theoretical and experimental research on tooth root bending stress of face gear

Depth-sensing Indentation Measurement and Finite Element Analysis of Residual Stress Field Near Fatigue Crack Tip

Gear Tooth Root Fatigue Behaviour

Gear Root Bending Strength: A Comparison Between Single Tooth Bending Fatigue Tests and Meshing Gears

Investigation of Crack Propagation Behaviour in Thin-Rim Gears: Experimental Tests and Numerical Simulations

An Experimental Study on the Accuracy of Cumulative Damage Models in Gear Tooth Bending Fatigue

Fatigue Behavior of Gear Tooth root under Moving Load

Investigation of tooth crack opening state on time varying meshing stiffness and dynamic response of spur gear pair

Effect of tooth root fillet on root bending stress

A numerical model for total bending fatigue life estimation of carburized spur gears considering the hardness gradient and residual stress

Molecular dynamics simulation of crack initiation and propagation in bcc iron under load within spur gear tooth root

Research on Root Strain Response Characteristics of Inner Ring of Planetary Gear Transmission System with Crack Fault

Vibration characteristic analysis of spur gear systems under tooth crack or fracture

Research on the time-varying mesh stiffness method and dynamic analysis of cracked spur gear system considering the crack position

Stiffness Modeling of Tooth Interior Fatigue and Tooth Flank Fracture and Their Fault Characteristics in Electromechanical Coupling Systems

Atomistic Scale Fracture Behavior of the Bcc Iron with {1 1 0} Crack under Dynamic Rectangular Loading Rate

Research on the Strength Calculation Method and Effects of Gear Parameters for High-Coincidence High-Tooth Gears

Gear bending fatigue life prediction based on continuum damage mechanics and linear elastic fracture mechanics