Abstract:A numerical model for determination the gear tooth root fatigue behaviour is presented. Two cases are being explored, first in which gear tooth was loaded with normal pulsating force acting at the highest point of single tooth contact, and second in which the fact that in actual gear operation the magnitude as well as the position of the force changes as the gear rotates through the mesh is taken into account. The fatigue process leading to tooth breakage is divided into crack initiation and crack propagation period. The critical plane damage model has been used to determine the number of stress cycles required for the fatigue crack initiation. The critical plane methods predict not only fatigue crack initiation life, but also the initiated crack direction, which makes a good starting point for further fatigue crack propagation studies. Finite element method and linear elastic fracture mechanics theories are then used for the further simulation of the fatigue crack growth under a moving load. Moving load produces a non-proportional load history in a gear's tooth root. Consequently, the maximum tangential stress theory will predict a unique kink angle for each load increment, but herein crack’ s trajectory is computed at the end of the load cycle. An approach that accounts for fatigue crack closure effects is developed to propagate crack under non-proportional load. The total number of stress cycles for the final failure to occur is then a sum of stress cycles required for the fatigue crack initiation and number of loading cycles for crack propagation from the initial to the critical length. Although some influences (non-homogeneous material, traveling of dislocations, etc.) were not taken into account in the computational simulations, the presented model seems to be very suitable for determination of service life of gears because numerical procedures used here are much faster and cheaper if compared with the experimental testing.

Crack Propagation in the Spur Gear of Tubler Gear Mechanism of Lathe Machine

Crack propagation life of high-speed aviation gear

Fatigue Crack Propagation Analysis in an Aero-Engine Turbine Disc Using Computational Methods and Spin Test

Investigation of Crack Propagation Behaviour in Thin-Rim Gears: Experimental Tests and Numerical Simulations

Gear Tooth Root Fatigue Behaviour

A numerical model for total bending fatigue life estimation of carburized spur gears considering the hardness gradient and residual stress

Gear Tooth Root Crack Path and Fatigue Life

Gear fatigue crack prognosis using embedded model, gear dynamic model and fracture mechanics

Research on the time-varying mesh stiffness method and dynamic analysis of cracked spur gear system considering the crack position

PREDICTION OF 3 -D CRACK GROWTH IN THIN RIM-GEARS

Effect of Initial Crack Position on Crack Propagation Behaviors of Heavy-Duty Transmission Gear

Investigations on crack propagation and meshing characteristics of planetary gear train considering crack closure effect

Extended crack propagation in nitrided and carburised steels subject to rolling contact fatigue

Gear Rim Failure Prediction Based on Fracture Mechanics

Analysis of Tooth Root Crack Initiation, Propagation and Fracture Surface Based on Gear Bending Fatigue Test

Gear bending fatigue life prediction based on continuum damage mechanics and linear elastic fracture mechanics

Vibration characteristic analysis of spur gear systems under tooth crack or fracture

Nonlinear dynamics of a spur gear pair with tooth root crack based on an amplitude modulation function

Finite Element Analyses of Non-Standard Spur Gears

Prediction of bending fatigue life for gears based on dynamic load spectra

Mesh Stiffness Modeling and Dynamic Simulation of Spur Gears with Body Crack under Speed Fluctuation Condition