Integrated wear prediction model for cylindrical gear with variable hyperbolic circular arc tooth trace under mixed elastohydrodynamic lubrication
Yongqiao Wei,Dong Yang,Rui Guo,Zhongtao Ren,Zeyu Li,Lan Luo
DOI: https://doi.org/10.1007/s12206-022-0726-1
IF: 1.81
2022-07-30
Journal of Mechanical Science and Technology
Abstract:Cylindrical gear with variable hyperbolic circular arc tooth trace (VH-CATT) is a new type of gear. Sliding wear is the main mode of the surface failure of multiple mechanical parts. Both the lubrication state and contact temperature considerably influence wear characteristics, which may aggravate the transmission performance of gear pairs. Wear, contact temperature, as well as lubrication states are jointly explored. Therefore, an integrated wear prediction model was proposed through taking into account flash contact temperature and surface roughness of VH-CATT cylindrical gears in mixed elastohydrodynamic lubrication. According to the equivalent ellipse contact model of VH-CATT cylindrical gears and tooth surface equation, normal curvature and velocity relations for VH-CATT cylindrical gears were observed, and the normal meshing force was obtained through the consideration of load sharing coefficients and quality grades. Flash contact temperature was estimated by using the literature. This study proposes analytical solutions for investigating how various surface roughness, operation, and geometric parameters affect asperity contact ratio (ACR), asperity contact pressure (ACP), flash contact temperature (FCT), as well as wear depth (WD) related to driving gears. ACR, ACP, FCT, as well as WD initially decrease and then increase from engaging-in to engaging-out processes. The minimum occurs at the pitch point. The WD declines as module, cutter radius, and rotational velocity increase while augmenting when surface roughness and torques increase. The maximum and minimum wear depths in driving gears occur at the dedendum and pitch point, respectively. Its overall wear is reduced by 23.16 % compared to the wear of spur gears. The results are valuable for the studies of tooth pitting, wear resistance, and fatigue life improvement for VH-CATT cylindrical gear. These studies can provide verification data and references required for engineering designs and VH-CATT cylindrical gear operations.
engineering, mechanical