Abstract:The established linear fatigue life prediction model based on the Miner rule has been widely applied to fatigue life prediction under constant amplitude uniaxial and multiaxial loading. Considering the physical significance of crack formation and propagation, a multiaxial equivalent linear fatigue life prediction model is put forward based on Miner rule and critical plane method under constant amplitude loading. The essence of this approach is that the equivalent strain, which consists of the shear strain and normal strain on the critical plane, replaces the relevant parameter of uniaxial nonlinear fatigue damage model. The principal axes of stress/strain rotate under non-proportional loading. Meanwhile, the microstructure of material and slip systems change, which lead to additional hardening effect. The ratio of cyclic yield stress to static yield stress is used to represent the cyclic hardening capacity of material, and the influence of phase difference and loading condition on the non-proportional hardening effect is considered. The multiaxial fatigue life is predicted using equivalent stain approach, maximum shear stain amplitude model, CXH model, and equivalent multiaxial liner model under proportional and/or non-proportional loading. The smooth and notched fatigue specimens of four kinds of materials (Q235B steel, titanium alloy TC4, Haynes 188, and Mod.9Cr-1Mo steel) are used in the multiaxial fatigue experiments to verify the proposed model. The predicted results of these materials are compared with the test results, and the results show that these four models can achieve good effect under proportional loading, but the proposed model performs better than the other three models under non-proportional loading. Meanwhile, it also verifies that the proposed enhancement factor can reflect the influence of phase difference and material properties on additional hardening.

A life prediction model for rolling contact fatigue based on the improved moment of load path method

Multiaxial Fatigue Life Prediction Based on Damage Mechanics and Critical Plane Method

Fatigue Life Prediction of Rolling Bearings Based on Modified SWT Mean Stress Correction

A rolling contact fatigue health prediction model based on load interaction and damage energy accumulation

An Improved Multiaxial Low-Cycle Fatigue Life Prediction Model Based on Equivalent Strain Approach

A Multiaxial Fatigue Method for Rolling Contact Fatigue Life Prediction of Axle Box Bearing under Wheel-Rail Excitation Conditions

A modified nonlinear fatigue damage accumulation model for life prediction of rolling bearing under variable loading conditions

A New Model of Multiaxial Fatigue Life Prediction with the Influence of Different Mean Stresses

Multiaxial fatigue life prediction for metals by means of an improved strain energy density-based critical plane criterion

Establishment And Verification Of Multiaxis Fatigue Life Prediction Model

A Rolling Contact Fatigue Life Prediction Model for Bearing Steel Considering Its Gradient Structure Due to Cyclic Hardening

An improved critical plane-energy multiaxial fatigue life prediction model considering shear mean stress

Multiaxial fatigue life prediction based on a simplified energy-based model

A New Multiaxial Fatigue Model for Life Prediction Based on Energy Dissipation Evaluation

A NEW NON-LINEAR CONTINUUM DAMAGE MECHANICS MODEL FOR THE FATIGUE LIFE PREDICTION UNDER VARIABLE LOADING

Probabilistic Model of the Multiaxial Low-Cycle Fatigue Life Prediction

Multiaxial Fatigue Life Prediction Based on Short Crack Propagation Model with Equivalent Strain Parameter

A Modified Cumulative Damage Model for Fatigue Life Prediction under Variable Amplitude Loadings

A Multi‐axial Low‐cycle Fatigue Life Prediction Model Considering Effects of Additional Hardening

A new multiaxial fatigue life prediction model considering additional hardening effect

Residual fatigue life prediction based on a novel improved Manson-Halford model considering loading interaction effect