Abstract:The established linear fatigue life prediction model based on the Miner rule has been widely applied to fatigue life prediction under constant amplitude uniaxial and multiaxial loading. Considering the physical significance of crack formation and propagation, a multiaxial equivalent linear fatigue life prediction model is put forward based on Miner rule and critical plane method under constant amplitude loading. The essence of this approach is that the equivalent strain, which consists of the shear strain and normal strain on the critical plane, replaces the relevant parameter of uniaxial nonlinear fatigue damage model. The principal axes of stress/strain rotate under non-proportional loading. Meanwhile, the microstructure of material and slip systems change, which lead to additional hardening effect. The ratio of cyclic yield stress to static yield stress is used to represent the cyclic hardening capacity of material, and the influence of phase difference and loading condition on the non-proportional hardening effect is considered. The multiaxial fatigue life is predicted using equivalent stain approach, maximum shear stain amplitude model, CXH model, and equivalent multiaxial liner model under proportional and/or non-proportional loading. The smooth and notched fatigue specimens of four kinds of materials (Q235B steel, titanium alloy TC4, Haynes 188, and Mod.9Cr-1Mo steel) are used in the multiaxial fatigue experiments to verify the proposed model. The predicted results of these materials are compared with the test results, and the results show that these four models can achieve good effect under proportional loading, but the proposed model performs better than the other three models under non-proportional loading. Meanwhile, it also verifies that the proposed enhancement factor can reflect the influence of phase difference and material properties on additional hardening.

Life prediction method based on short crack propagation considering additional damage under axial-torsional non-proportional loading

A new multiaxial fatigue life prediction model considering additional hardening effect

A novel fatigue-oxidation-creep life prediction method under non-proportional loading

Multiaxial Fatigue Life Prediction Based on Nonlinear Continuum Damage Mechanics and Critical Plane Method

Multiaxial Notch Fatigue Life Prediction Based on the Dominated Loading Modes under Variable Amplitude Loading

Life Prediction of Corrosion-Fatigue Based on a New Crack Growth Rate Model with Damage and the Extended Finite Element Method

Fatigue life prediction model of metallic materials considering crack propagation and closure effect

Life prediction method based on damage mechanism for titanium alloy TC4 under multiaxial thermo-mechanical fatigue loading

A life prediction model for rolling contact fatigue based on the improved moment of load path method

Multiaxial Fatigue Lifetime Estimation Based on New Equivalent Strain Energy Damage Model under Variable Amplitude Loading

Damage Evolution Model Considering Fatigue Failure Factor Under Multiaxial Non-Proportional Loading

Multiaxial fatigue life prediction method based on the back-propagation neural network

Multiaxial fatigue life prediction for metals by means of an improved strain energy density-based critical plane criterion

Assessment of Three-Dimensional Multi-Crack Propagation for Fatigue Life Prediction

Multiaxial Fatigue Damage Parameter and Life Prediction without Any Additional Material Constants

Numerical prediction based on XFEM for mixed-mode crack growth path and fatigue life under cyclic overload

Multiaxial high-cycle fatigue failure and life prediction based on critical plane method

Multiaxial notch fatigue life prediction based on the dominated loading control mode under variable amplitude loading

High-cycle and low-cycle fatigue life prediction under random multiaxial loadings without cycle counting

Notch Fatigue Life Prediction Considering Nonproportionality of Local Loading Path under Multiaxial Cyclic Loading

A Transition Size of Dividing Crack Initiation and Propagation Phases and the Fatigue Total Life Prediction Approach