Abstract:Fully automatic fatigue crack growth simulation system is developed using S-version FEM (S-FEM). This system is extended to fracture in heterogeneous material. In the heterogeneous material, crack tip stress field becomes mixed mode condition, and crack growth path is affected by inhomogeneous materials and mixed mode conditions. Stress Intensity Factors (SIF) in mixed mode condition are evaluated using Virtual Crack Closure Method (VCCM). Criteria for crack growth amount and crack growth path are used based on these SIFs, and growing crack configurations are obtained. At first, basic problem is solved, and results are compared with previously reported ones. It is shown that this system gives adequately accurate estimation of SIFs. Then 2-dimentional fatigue crack growth problems are simulated using this system. crack growth problems are simulated using this system. The first example is a plate with interface between hard and soft materials. Crack tends to grow into soft material through interface. Second example is a plte with distributed hard inclusions. Crack takes zig-zag path by keeping away from hard inclusions. In each cases, crack growth path changes in complicated manner. Changes of SIFs are also shown and discussed. Finally it is shown that this system is useful for the prediction of residual fatigue life in heterogeneous material. INTRODUCTION Fatigue crack growth is important problem for the integrity of structures. To avoid catastrophic accident, predictions of crack growth path and fatigue life are key technologies. As fatigue crack growth occurs in complicated structures, these predictions have met serious difficulties. FEM is usually used for these predictions, but re-meshing process is needed for modeling of growing crack configurations, it has been a bottleneck for the application of FEM to fatigue crack growth problems, especially in three-dimensional field.

Numerical prediction based on XFEM for mixed-mode crack growth path and fatigue life under cyclic overload

An X-FEM Approach for Simulation of 3-D Multiple Fatigue Cracks and Application to Double Surface Crack Problems

Numerical simulation of crack propagation path and fatigue life prediction for mixed mode cracks

A Simple And Efficient X-Fem Approach For Non-Planar Fatigue Crack Propagation

Structural Fatigue Crack Propagation Simulation and Life Prediction Based on Improved XFEM-VCCT

Numerical Simulation of the Multiple 3D Crack Propagation from the Countersunk Fastener Holes

Computational analysis of mixed-mode fatigue crack growth in quasi-brittle materials using extended finite element methods

Numerical Investigation of Mixed-Mode Crack Growth in Ductile Material Using Elastic–plastic XFEM

Life Prediction of Corrosion-Fatigue Based on a New Crack Growth Rate Model with Damage and the Extended Finite Element Method

Fatigue Crack Propagation Simulation Method Using XFEM with Variable-Node Element

Application of Strain Energy Based Approach for Evaluation of Fatigue Crack Growth Retardation Effect under Random Overload

Continuum Damage Mechanics Combined with the Extended Finite Element Method for the Total Life Prediction of a Metallic Component

A Numerical Analysis with Scaled Boundary Finite Element Method to Simulate Mixed-mode Crack Propagation for Concrete Beams

Multiaxial Fatigue Life Prediction Based on Damage Mechanics and Critical Plane Method

Abaqus implementation of extended finite element method using a level set representation for three-dimensional fatigue crack growth and life predictions

Multiaxial Fatigue Life Prediction Based on Short Crack Propagation Model with Equivalent Strain Parameter

Three-dimensional Fatigue Crack Growth Prediction Method Based on Consistency Retention

Numerical and Experimental Method for the Prediction of the Propagation Life of Fatigue Crack on Metallic Materials

A New Approach to Predicting Fatigue Crack Propagation

135 Numerical Simulation of Fatigue Crack Growth in Heterogeneous Material

Two-Dimensional Crack Growth Simulation under Mixed-Mode Loading