Abstract:Accurate assessment of fracture behavior and life prediction of cracked materials based on the mixed mode fracture criteria is of utmost importance in fracture mechanics. In this study, the modified fracture criteria incorporating T-stress for mixed mode I-II cracks were comprehensively reviewed. Additionally, a comparative analysis was conducted between the experimental results obtained from five different cracked configurations and the theoretical predictions according to these modified criteria. Moreover, a brief discussion was held regarding the effect of T-stress on both crack initiation angle and fracture toughness, accompanied by providing some suggestions. The results revealed that the predictive accuracy of modified criteria exhibited noticeable variations across different cracked configurations due to the significant disparities in both the sign and magnitude of T-stress around the crack tip. However, it was observed that the predicted curves based on the modified fracture criteria for the semi-circular bend and edge-crack triangular specimens had remarkable similarities owing to their similar biaxial stress ratio B. When the mode II loading dominated, the generalized maximum tangential stress, generalized minimum strain energy density and generalized averaged strain energy density criteria were suitable for the semi-circular bend, edge-crack triangular, central crack rectangular and short bend beam specimens with positive T-stresses, whereas the maximum tangential strain, generalized maximum tangential stress and generalized maximum tangential strain energy density criteria could provide better theoretical predictions for central cracked Brazilian disk specimens having a negative T-stress.

Mixed-mode Fatigue Crack Growth Prediction in Biaxially Stretched Sheets

Mechanistic Modeling of Fatigue Crack Growth in Asphalt Fine Aggregate Matrix under Torsional Shear Cyclic Load

Improved Ultra-Low Cycle Fatigue Fracture Models for Structural Steels Considering the Dependence of Cyclic Damage Degradation Parameters on Stress Triaxiality

Numerical prediction based on XFEM for mixed-mode crack growth path and fatigue life under cyclic overload

Computational analysis of mixed-mode fatigue crack growth in quasi-brittle materials using extended finite element methods

Prediction of Low Cycle Fatigue Crack Growth under Mixed-mode Loading Conditions Using Cohesive Zone Models

Towards Fully Automatic Modelling of the Fracture Process in Quasi-Brittle and Ductile Materials: a Unified Crack Growth Criterion

Mixed-mode fatigue crack growth analysis of I-shaped steel girders with trapezoidal corrugated-webs

Computational Boundary Layer Approaches for Fatigue Crack Propagation under Mixed‐mode Loading Conditions

Numerical simulation of distortion-induced fatigue crack growth using extended finite element method

Mixed-mode fatigue crack growth and life prediction of an automotive adhesive bonding system

Multiaxial high-cycle fatigue failure and life prediction based on critical plane method

Application of modified fracture criteria incorporating T-stress for various cracked specimens under mixed mode I-II loading

Development of X-FEM Methodology and Study on Mixed-Mode Crack Propagation

Fatigue Crack Propagation in Heterogeneous Materials under Remote Cyclic Loading

A Simple Engineering Approach in the Prediction of the Effect of Stress Ratio on Fatigue Threshold

Structural Fatigue Crack Propagation Simulation and Life Prediction Based on Improved XFEM-VCCT

A fast approach for predicting stress intensity factors in tortuous cracks under mixed-mode loading

3D-generalized maximum tangential strain criterion for predicting mixed-mode I/II/III fracture initiation of brittle materials considering T-stress effects

Assessment of Three-Dimensional Multi-Crack Propagation for Fatigue Life Prediction

Modelling the notch-induced anomalous growth of short fatigue cracks and the growth of long fatigue cracks with unified phase-field formulas