Abstract:The classical nonlinear fatigue cumulative damage model Manson-Halford is widely used in fatigue life analysis and prediction, but this model lacks consideration for the effects of load interaction. At present, some studies have proposed new correction models to overcome the shortcomings of classical models. However, the problem with these models is that the parameters are difficult to determine, resulting in a cumbersome application process or the correction process is based only on a single parameter. Insufficient correction leads to large fluctuations in life prediction errors. To overcome the above problems, this article proposes a new correction method and establishes a new improved model. Unlike existing models, the newly improved model is based solely on S-N curve parameters and does not require additional material parameters. It fully considers the relationship between adjacent loads and the difference in fatigue life under different stress states, and dynamically modifies the classical model based on larger influence weights. By conducting multi-level fatigue tests on 300M steel, a new improved model was used to accurately predict its remaining fatigue life. Compared with the classical model, the prediction error was reduced by 11.75 %. Utilized fatigue test data from various other materials to predict the fatigue life of the improved model under different levels of stress loading. The results indicate that in the vast majority of cases, the improved model has the highest prediction accuracy among all compared models, with a minimum relative prediction error of only 3.79 % and small fluctuations in prediction error. Compared with the classical model, the maximum reduction in relative prediction error after model improvement reached 28.73 %, indicating the effectiveness and accuracy of the new improved model.

A method for predicting fatigue life under different mean stresses

A New Approach for Studying Fatigue Damage

Effective stress and fatigue life prediction with mean stress correction models on a ferritic stainless steel sheet

A life prediction model for rolling contact fatigue based on the improved moment of load path method

An improved critical plane-energy multiaxial fatigue life prediction model considering shear mean stress

Fatigue life prediction considering mean stress effect based on random forests and kernel extreme learning machine

A New Empirical Life Prediction Model For 9-12%Cr Steels Under Low Cycle Fatigue And Creep Fatigue Interaction Loadings

Residual fatigue life prediction based on a novel improved Manson-Halford model considering loading interaction effect

Multiaxial fatigue life prediction for metals by means of an improved strain energy density-based critical plane criterion

Assessment of prior fatigue damage and a new approach to predict remanent creep rupture of P92 steel

Influence of the Mean Stress on the Fatigue Life of Welded Joints under Variable Amplitude Loading

An Elasto-Plastic Damage Accumulation Model for Fatigue Life Predication of Ductile Metals at the Yield Stress

A Simple Engineering Approach in the Prediction of the Effect of Stress Ratio on Fatigue Threshold

Development of improved Manson-Coffin model considering the effect of yield stress under asymmetrical cyclic loading

Fatigue Life Data Fusion Method of Different Stress Ratios Based on Strain Energy Density

An enhanced stress field intensity approach for fatigue life assessment combining notch and size effect

The mean stress and phase angle effect on multiaxial fatigue behavior of a TiAl alloy: Failure analysis and life modeling

A Fatigue Life Prediction Approach for Resistance Spot Welded Joints with Consideration of the Stress Ratio Effect

Multiaxial Fatigue Lifetime Estimation Based on New Equivalent Strain Energy Damage Model under Variable Amplitude Loading

A Fuzzy Residual Strength Based Fatigue Life Prediction Method

EFFECT OF CYCLIC STRESS-STRAIN BEHAVIOR ON THE PREDICTION OF FATIGUE LIFE FOR CARBON STEEL