Abstract:International Journal of Damage Mechanics, Ahead of Print. A uniaxial material model for fatigue damage accumulation, established on the connection of unit elements, is presented in this paper. Although these units are regarded as micro-elements in the proposed model, they are based on a hysteretic operator that enables calculating hysteretic energy loss as an analytical expression. Further, this unit element represents a mechanical model with elastoplastic damage behavior in function of strain. The second level of modeling is defined by the connection of these units (micro-elements) with different values of total energy dissipated at failure. By changing the distribution of dissipated energy limit, various fatigue damage evolution laws are developed. Calculation of total and hysteretic energy loss in one loading cycle is also affected by fatigue damage as the varying number of unit elements are been eliminated when their maximum dissipation energy is reached. Material parameters for the model were defined based on the experimental monotonic and cyclic stress-strain tests, still, detailed comparison was not performed as the main advantage and aim of the paper was the development of the method for assessment of damage evolution in fatigue analysis. On the other hand, the number of cycles to failure (Nf) and total heat dissipation are compared in both qualitative and quantitative aspects with experimental results. Finally, based on the proposed model, mean strain and load sequence effect diagrams were constructed. It is shown that the proposed model can provide a reliable estimation of fatigue life in the low-cycle regime of loading. The maximum error for the calculated Nf was 3% for constant strain loading for experiments with strain amplitude less than 5%. In load sequence fatigue life estimation, the proposed model demonstrated good accuracy, with a maximum error of 34%. Further, obtained results were achieved with different types of damage evolution that could be defined for the same material and fatigue life.

A New Approach to Low-Cycle Fatigue Damage Based on Exhaustion of Static Toughness and Dissipation of Cyclic Plastic Strain Energy During Fatigue

A New Approach for Studying Fatigue Damage

A New Approach to Fatigue Damage Modeling of Composite Laminates

Isodamage Curve-Based Fatigue Damage Accumulation Model Considering the Exhaustion of Static Toughness

Cumulative damage model for steel weld under low-cycle fatigue

A CDM model for remaining fatigue-lifetime prediction of ductile metals

A New Approach to Predicting Fatigue Crack Propagation

A new damage variable for low-cycle fatigue of metallic materials

An Approach for Fatigue Life Prediction

MULTIAXIAL LOW CYCLE FATIGUE LIFE PREDICTION MODEL BASED ON PLASTIC ENERGY

An Elasto-Plastic Damage Accumulation Model for Fatigue Life Predication of Ductile Metals at the Yield Stress

A Plastic Fracture Mechanics Model for Characterization of Multiaxial Low-Cycle Fatigue

A Competitive Mechanism Driven Damage-Plasticity Model For Fatigue Behavior Of Concrete

Fatigue Life Prediction for Structure under Fatigue and Low-Energy Impact Based on Continuum Damage Mechanics

A Direct Approach Toward Simulating Cyclic and Non-Cyclic Fatigue Failure of Metals

An Energy-Based Approach for Fatigue Crack Growth

Damage mechanics model dependent on stress triaxiality under low cycle fatigue for polymers

An Efficient Life Prediction Methodology For Low Cycle Fatigue-Creep Based On Ductility Exhaustion Theory

Energy based damage model for low-cycle fatigue of ductile materials

Investigation of the Low-Cycle Fatigue Life under Multi-Axial Nonproportional Loading

A RESEARCH APPROACH BASED ON THE EXHAUSTION MODEL OF MATERIAL DUCTILITY FOR FATIGUE DAMAGE