Abstract:Fatigue indicator parameters (FIPs) serve as the measurement of the driving force for fatigue crack initiation (FCI). The extreme value distributions of FIPs for fatigue life scatter (i.e., fatigue crack initiated from surface or subsurface) in the high cycle fatigue (HCF) to very high cycle fatigue (VHCF) regime are computed of AA7075-T6. The FIPs are averaged in the volume of sub-band in the scale of sub-grain proposed based on the concept of slip system of AA7075-T6 where sub-bands are extracted from statistical volume elements (SVEs) using open-source called Dream-3D. SVEs are built via the experimental crystalline microstructure. The material response variables required in the computation of FIPs are obtained by embedding crystal plasticity theory to the crystal plasticity finite element model via open-source software PRISMS-Fatigue. To meet statistical requirements, 50 instantiations of SVEs are modeled for both traction-free and fully periodic boundary conditions, respectively, corresponding to the surface and subsurface cases under different strain amplitudes (i.e., 0.362%, 0.312%, 0.289%, and 0.254%). It is found that the FIPs are higher under high stress levels indicating that fatigue crack tends to initiate at high stress levels. In addition, the low driving force can be found in the simulations with fully periodic boundary conditions throughout the SVEs, whereas the higher FIPs under traction-free boundary conditions tend to form close to the free surface under cyclic loading conditions. Furthermore, the highest FIPs have a propensity to scatter along with the depth of SVEs with the traction-free surface under strain amplitude of 0.254%, which means the fatigue life in the VHCF regime has a higher scatter. The interactions between the high symmetry of FCC crystalline structure and free surface combining the loading amplitudes have a compound effect on the FIPs, especially at low stress amplitudes, which also has a greater impact on the ultra-high-cycle fatigue life. To this end, the VHCF and HCF experiments are performed under an ultrasonic fatigue experimental system with a frequency of 20 kHz with different stress levels corresponding to the strain amplitude in the simulations. Besides, the morphology fracture surface of presentative samples was observed via the scanning electron microscope (SEM). The comparison between the simulation and the experimental results indicates that the EVD of FIPs is efficient in preciously predicting the FCI and well explain the fatigue life scatter of the AA7075-T6 in the HCF to VHCF regime.

An energy-CP-combined model for predicting the fatigue life of polycrystalline materials under high cycle and very high cycle fatigue

A New Empirical Life Prediction Model For 9-12%Cr Steels Under Low Cycle Fatigue And Creep Fatigue Interaction Loadings

High-cycle and very-high-cycle fatigue lifetime prediction of additively manufactured AlSi10Mg via crystal plasticity finite element method

Classical fatigue theory informed phase-field model for high-cycle fatigue life and fatigue crack growth

A data-physics integrated approach to life prediction in very high cycle fatigue regime

Microstructure-based fatigue life model of metallic alloys with bilinear Coffin-Manson behavior

A nonlinear cumulative fatigue damage life prediction model under combined cycle fatigue loading considering load interaction

High-cycle and low-cycle fatigue life prediction under random multiaxial loadings without cycle counting

A modified nonlinear cumulative damage model for combined high and low cycle fatigue life prediction

Investigation of the Fatigue Life Scatter for AA7075-T6 Using Crystal Plasticity Finite Element Method in the High to Very High Cycle Fatigue Regime

A modified SWT model for very high cycle fatigue life prediction of L-PBF Ti-6Al-4 V alloy based on Single Defect: Effect of building orientation

Multiaxial fatigue life prediction for metals by means of an improved strain energy density-based critical plane criterion

Lifetime prediction of time-dependent thermomechanical fatigue of high temperature alloys

Defect characteristics-based low-cycle fatigue life prediction model for additive manufactured Ti-6Al-4 V alloys

Very-high-cycle fatigue behavior of AlSi10Mg manufactured by selected laser melting: Crystal plasticity modeling

Crystal plasticity modeling of low-cycle fatigue behavior of an Mg-3Al-1Zn alloy based on a model, including twinning and detwinning mechanisms

A crystal plasticity-based approach for creep-fatigue life prediction and damage evaluation in a nickel-based superalloy

Thermal-mechanical fatigue life prediction considering fatigue-creep interaction effects

Machine learning based very-high-cycle fatigue life prediction of Ti-6Al-4V alloy fabricated by selective laser melting

Prediction of combined cycle fatigue life of TC11 alloy based on modified nonlinear cumulative damage model

Prediction of low-cycle fatigue properties of additive manufactured IN718 by crystal plasticity modelling incorporating effects from crystallographic orientations and defects