Abstract:To realize cost-effectively manufacture of high-performance Si3N4 porous ceramic, a ferrosilicon nitride porous ceramic with an optimized interlocking structure was synthesized by flash combustion synthesis using FeSi75 powder as raw material. And the technology has been improved in many ways to ensure stable industrial production. The theoretical combustion temperature of FeSi75 in N2(g) is up to 4608K, while Si3N4 is unstable. Both adding diluent and designing the preheat temperature of nitrogen are taken to control synthesis temperature below 1600 °C. During synthesis, the Fe–Si liquid phase and SiO(g), which are essential for the selective growth of elongated columnar β-Si3N4 and whisker α-Si3N4 respectively, are formed firstly. Then, nitriding proceed in multiple ways. N diffuses through Fe–Si(l) and reacts with Si to form β-Si3N4, and the growth of elongated β-Si3N4 in Fe–Si liquid follows the dynamic ripening model, which is very fast and effective. Thus, an interlocking structure composed of elongated β-Si3N4 with an aspect ratio above 20 is reached. There is also an indirect nitridation reaction, that is, FeSi75 preferentially reacts with trace O2 in atmosphere to form SiO(g), which is further nitrided to form needle-like α-Si3N4. Needle-like α-Si3N4 is interspersed in the well-developed columnar β-Si3N4, making the structure stronger. Fe finally exists in the form of Fe3Si, which binds the surrounding elongated Si3N4 to form a sea-urchin like unit, making the structure more stable and strengthened. Through control of these reactions, optimizations in microstructure are reached, and the annual output of has reached 25,000 tons. The reaction model is established.

Preparation of silicon nitride fibers by additive-assisted nitridation of polysilicon waste powder

Optimization of Microstructure to Improve Si3n4 Ceramics with Thermal Conductivity and Mechanical Properties: Effect of Si and Α-Si3n4 Powder Composition

Mass Production of Α-Silicon Nitride Single-crystalline Nanowires

Efficient Preparation of Si3N4 by Microwave Treatment of Solar-Grade Waste Silicon Powder

Preparation of silicon nitride powder from silica and ammonia

Novel precursor-derived Al–C–N–(O)-based ceramic additive for the low-temperature pressureless sintering of silicon nitride

Research of Silicon Nitride Powder Prepared by Self-propagating High-temperature Synthesis

Cost-effective manufacture and synthesis mechanism of ferrosilicon nitride porous ceramic with interlocking structure

Synthesis of Si 3 N 4 Nanowires by Catalyst‐free Nitridation of (si + SiO 2 ) Mixture

Synthesis of Silicon Nitride/Silicon Carbide Nanocomposite Powders through Partial Reduction of Silicon Nitride by Pyrolyzed Carbon

Utilization of Silicon Dust to Prepare Si3N4 Used for Steelmaking Additives: Thermodynamics and Kinetics

Preparation of high‐purity α‐Si3N4 powder via multifunctional synergistic catalysis and pretreatment method

Synthesis and Characterization of Several alpha-Silicon Nitride Nanostructures

Synthesis And Growth Mechanism Of Silicon Nitride Nanostructures

Synthesis of alpha-Si3N4 whiskers or equiaxed particles from amorphous Si3N4 powders

Synthesis of monodisperse and high-purity α-Si3N4 powder by carbothermal reduction and nitridation

A simple method to synthesize Si3N4 and SiO2 nanowires from Si or Si/SiO2 mixture

Preparation of silicon-nitride ceramic fibers with hafnium compounds loaded on the surface and the high temperature properties

Study on rapid nitridation process of molten silicon by thermogravimetry and in‐situ Raman spectroscopy

Polymer-derived SiHfN ceramics: From amorphous bulk ceramics with excellent mechanical properties to high temperature resistant ceramic nanocomposites

Effect of Fe‐Contained Species on the Preparation of Α‐si3n4 Fibers in Combustion Synthesis