Abstract:Abstract Copper (Cu)-matrix composites combine the high electrical and thermal conductivities of Cu with the enhanced wear resistance and strength of the reinforcement material, and are therefore widely used for electrical contact applications in a diverse range of fields. In the current study, tungsten-reinforced copper (W—Cu) composite powders are fabricated using a novel electroless Cu plating process in which the homogeneity of the powder mixture is improved via the use of an ultrasonic agitation technique. The volume content of the tungsten particle reinforcement in the composite specimens is 3, 6, and 12 per cent, respectively, and standard powder metallurgical techniques are then applied to produce the final composite powders. The mechanical and electrical properties of the composite powders are evaluated at room temperature and at temperatures ranging from 100 to 300 °C. Fracture surfaces of the composite samples are ana-lysed using scanning electron microscopy. The results show that the mechanical properties of the W—Cu composite samples are significantly better than those of pure Cu specimens, particularly at higher temperatures. Furthermore, the addition of 3 vol% W particles to the W—Cu composite is found to yield a reduction of not more than 2 per cent in the electrical conductivity of the composite sample compared to that of a pure Cu specimen. Overall, the results indicate that the optimal mechanical and electrical properties are obtained by mixing pure Cu powder with 3 vol% of Cu-plated W particles with a mean dimension of 1 μm.

Research Progress on the Effect of Third Components on the Microstructure and Properties of W-Cu Composites

Influences of Ni/Cu/Cr3C2 Composite Additive on Microstructure and Properties of WC–10Co Fine Grained Hardmetal

Progress and Current Status in Research on Nanostructured Cu-Ag Microcomposites for Conductor Wires

Recent Advances in W–Cu Composites: A Review on the Fabrication, Application, Property, Densification, and Strengthening Mechanism

Strengthening Mechanisms and Research Progress in the W/Cu Interfaces

Research and Development on Microstructure, Properties and Alloying of Cu-Ag Filamentary Composites

Effects of Cr addition on the microstructural, mechanical and electrical characteristics of Cu–6wt.%Ag microcomposite

High-temperature mechanical and electrical properties of W-particle-reinforced Cu-matrix composites from improved electroless plated powders

The Progress of W-Cu Composite Materials Preparation Technique

Multilayered W-Cu composites with enhanced strength, electrical conductivity and wear resistance

Ultrafine W-Cu Composite Powder Research Progress

Research Progress in Copper Matrix Composites for Electronic Packaging

High hardness and wear resistance of W-Cu composites achieved by elemental dissolution and interpenetrating nanostructure.

Microstructure and high-temperature mechanical properties of Cu-W composite prepared by hot isostatic pressing

Effect of Silver Element on Microstructure and Properties of W-30Cu/TiC Composites

Improving comprehensive performance of copper matrix composite by spray pyrolysis fabricated CNT/W reinforcement

Eftect of third element on properties of CuCr alloys produced by explosive compaction

Effect of Rare Earth Addition on Microstructural, Mechanical and Electrical Characteristics of Cu-6%Fe Microcomposites

Synchronously improved mechanical strength and electrical conductivity of Carbon/Copper composites by forming Fe<sub>3</sub>C interlayer at C/Cu interface

Enhancing Interface Bonding and Electrical Conductivity of Copper/Carbon Composites

Enhanced Mechanical and Electrical Properties of CuCrZr-WC Alloy Prepared by Mechanical Alloying and Spark Plasma Sintering