Abstract:Abstract Copper (Cu)-matrix composites combine the high electrical and thermal conductivities of Cu with the enhanced wear resistance and strength of the reinforcement material, and are therefore widely used for electrical contact applications in a diverse range of fields. In the current study, tungsten-reinforced copper (W—Cu) composite powders are fabricated using a novel electroless Cu plating process in which the homogeneity of the powder mixture is improved via the use of an ultrasonic agitation technique. The volume content of the tungsten particle reinforcement in the composite specimens is 3, 6, and 12 per cent, respectively, and standard powder metallurgical techniques are then applied to produce the final composite powders. The mechanical and electrical properties of the composite powders are evaluated at room temperature and at temperatures ranging from 100 to 300 °C. Fracture surfaces of the composite samples are ana-lysed using scanning electron microscopy. The results show that the mechanical properties of the W—Cu composite samples are significantly better than those of pure Cu specimens, particularly at higher temperatures. Furthermore, the addition of 3 vol% W particles to the W—Cu composite is found to yield a reduction of not more than 2 per cent in the electrical conductivity of the composite sample compared to that of a pure Cu specimen. Overall, the results indicate that the optimal mechanical and electrical properties are obtained by mixing pure Cu powder with 3 vol% of Cu-plated W particles with a mean dimension of 1 μm.

Recent Advances in W–Cu Composites: A Review on the Fabrication, Application, Property, Densification, and Strengthening Mechanism

Strengthening Mechanisms and Research Progress in the W/Cu Interfaces

Multilayered W-Cu composites with enhanced strength, electrical conductivity and wear resistance

The Progress of W-Cu Composite Materials Preparation Technique

Research Progress on the Effect of Third Components on the Microstructure and Properties of W-Cu Composites

Strengthening Mechanisms and Thermal Models of Chemically Incompatible Metals (Mo/W‐Cu): A Review

High-temperature mechanical and electrical properties of W-particle-reinforced Cu-matrix composites from improved electroless plated powders

Insight into the Microstructure and Tensile Behavior of the W–Cu Composite Reinforced with Tungsten Fibers and Particulates

Graphene and its derivative reinforced tungsten–copper composites for electrical contact applications: A review

Review of Preparation and Application of Copper–steel Bimetal Composites

Tribological and Electrochemical Corrosion Behaviors of Cu-based Powder Metallurgy Composites Reinforced by In-Situ WC with Different Morphology

Effect of Grain Refinement on the Comprehensive Mechanical Performance of W–Cu Composites

Research progress on copper-carbon/carbon composites

Microstructure and high-temperature mechanical properties of Cu-W composite prepared by hot isostatic pressing

Ultrafine W-Cu Composite Powder Research Progress

Enhanced mechanical properties and thermal conductivity of W-30Cu composite fabricated with monodisperse and nearly spherical W powder

Improving comprehensive performance of copper matrix composite by spray pyrolysis fabricated CNT/W reinforcement

Freeze-casted tungsten skeleton reinforced copper matrix composites

Refractory carbide reinforced tungsten matrix composites

Research Progress on Copper/Aluminum Bimetal Composite

Current situation of ultrafine W-Cu composite powders preparation