Abstract:An innovative process for preparing silicon carbide (SiC) from acid leaching residue of ferronickel slag through a carbon–thermal reduction process was proposed in this study. The results indicate that the acid leaching residue is an ideal silicon source for SiC preparation according to its high amorphous silica content of 84.20% and fine particle size of d50 = 29.16 μm. Compared with carbon black, activated carbon, and graphite, coke is the more appropriate carbon source for SiC preparation. A micron-size SiC powder with grade of 88.90% and an average particle size (d50) of 44.68 μm can be obtained under the following conditions: the mass ratio of coke to leaching residue as 1.2:1, in an air atmosphere, reducing at 1600 °C for 3 h, following by decarbonizing at 700 °C for 4 h. The XRD, SEM and FTIR analyses show that the prepared powder is 3C-SiC and belongs to the β-SiC crystal type. Based on thermodynamic analysis and micromorphology observation, it can be concluded that with amorphous silica as the silicon source, the carbon–thermal synthesis of SiC powder follows both the solid–solid reaction mechanism and the gas–solid mechanism. The SiC created through solid–solid reaction is primarily nucleated in situ on amorphous SiO2, with a size close to that of the original acid-leaching slag, while the SiC generated according to the gas–solid mechanism mainly nucleates heterogeneously on the surface of carbon particles, resulting in a smaller particle size and mostly adhering to the surface of solid–solid nucleated SiC particles. This study provides a feasible method for the effective utilization of amorphous silica, which is also significant for the efficient consumption of the vast acid leaching residue.

Synthesis and physicochemical properties of β-silicon carbide prepared with reproduced carbon black and semiconductor packing waste by integrated mechanical and thermal activation (IMTA) process

The Synthesis Of Nanostructured Sic From Waste Plastics And Silicon Powder

Sustainable synthesis of silicon carbide from sludge waste generated in organosilane industry

Studies of synthesizing the SiC nanometer powders by chemical vapor reaction

Preparation of High-Quality Silicon with Silicon Cutting Waste by a Carbothermal Reduction Method

Solvothermal synthesis of Silicon Carbide nanomaterials

Improving SiC grain growth and reducing carbon content in pyrolyzed polycarbosilane using nanosized Si particles

Effect of temperature on the ability to synthesize SiC from rice husks

Microwave Sintering Rapid Synthesis of Nano/Micron β-SiC from Waste Lithium Battery Graphite and Photovoltaic Silicon to Achieve Carbon Reduction

Novel application of high temperature solution growth method in simultaneously preparing SiC/Ti 3 SiC 2 /TiC using photovoltaic Si waste and Ti-bearing blast furnace slag

Synthesis and characterization of submicron silicon carbide powders with silicon and phenolic resin

Green synthesis of porous SiC ceramics using silicon kerf waste in different sintering atmospheres and pore structure optimization

Preparation of Silicon Carbide Powder from Amorphous Silica and Investigation of Synthesis Mechanism

Recycle of silicon slurry cutting waste to prepare high purity SiC by salt-assisted carbothermic reduction

Effect of Impurities Control on the Crystallization and Densification of Polymer-Derived SiC Fibers

Synthesis of Bamboo‐like SiC Whiskers from Waste Silica Fume

Fabricating superior thermal conductivity SiC–AlN composites from photovoltaic silicon waste

Synthesis of nanocrystalline silicon carbide powders

Improving the strength and oxidation resistance of phenolic resin derived pyrolytic carbons via Cu-catalyzed in-situ formation of SiC@SiO2

A Novel Method for the Preparation of Porous SiC

Solid-State Synthesis of SiC Particle-Reinforced AZ91D Composites: Microstructure and Reinforcement Mechanisms