Abstract:An innovative process for preparing silicon carbide (SiC) from acid leaching residue of ferronickel slag through a carbon–thermal reduction process was proposed in this study. The results indicate that the acid leaching residue is an ideal silicon source for SiC preparation according to its high amorphous silica content of 84.20% and fine particle size of d50 = 29.16 μm. Compared with carbon black, activated carbon, and graphite, coke is the more appropriate carbon source for SiC preparation. A micron-size SiC powder with grade of 88.90% and an average particle size (d50) of 44.68 μm can be obtained under the following conditions: the mass ratio of coke to leaching residue as 1.2:1, in an air atmosphere, reducing at 1600 °C for 3 h, following by decarbonizing at 700 °C for 4 h. The XRD, SEM and FTIR analyses show that the prepared powder is 3C-SiC and belongs to the β-SiC crystal type. Based on thermodynamic analysis and micromorphology observation, it can be concluded that with amorphous silica as the silicon source, the carbon–thermal synthesis of SiC powder follows both the solid–solid reaction mechanism and the gas–solid mechanism. The SiC created through solid–solid reaction is primarily nucleated in situ on amorphous SiO2, with a size close to that of the original acid-leaching slag, while the SiC generated according to the gas–solid mechanism mainly nucleates heterogeneously on the surface of carbon particles, resulting in a smaller particle size and mostly adhering to the surface of solid–solid nucleated SiC particles. This study provides a feasible method for the effective utilization of amorphous silica, which is also significant for the efficient consumption of the vast acid leaching residue.

Recycle of silicon slurry cutting waste to prepare high purity SiC by salt-assisted carbothermic reduction

Sustainable synthesis of silicon carbide from sludge waste generated in organosilane industry

Preparation of High-Quality Silicon with Silicon Cutting Waste by a Carbothermal Reduction Method

A High-Efficiency and Energy-Saving Method for Purifying Industrial Silicon for Silicone Use

Recycling of carbonized rice husk for producing high purity silicon by the combination of electric arc smelting and slag refining

Preparation of Silicon Carbide Powder from Amorphous Silica and Investigation of Synthesis Mechanism

Preparation of Al-Si alloy from silicon cutting waste: Enabling oxide surface removing and silicon utilization improving via vacuum sintering

Slag refining at various viscosity conditions for SiC inclusion removal during Si scraps recycling

Study on Purification Technology of Silicon Carbide Crystal Growth Powder

The Effect of SiC on the Phase Composition and Structure of Mixed Slag

Improving flotation separation of micro Si/SiC particles from silicon sawing waste by surface hydrophilic modification

Separation and purification of silicon from cutting kerf-loss slurry waste by electromagnetic and slag treatment technology

The Synthesis Of Nanostructured Sic From Waste Plastics And Silicon Powder

High-value Recycling of Photovoltaic Silicon Waste: Accelerated Removal of Impurity Boron Through Na3AlF6-enhanced Slag Refining

Separation of SiC from Si by addition of Al with electromagnetic induction melting

Recycling of silicon from waste PV diamond wire sawing silicon powders: A strategy of Na2CO3-assisted pressure-less sintering and acid leaching

Study of the Preparation of High Purity Silicon by a New Electro-thermal Metallurgy Method

Synthesis of sodium silicate using industrial by-products glauber’s salt and microsilica: Effective reuse of the waste

Recycling of silicon scraps by electron beam melting coupled with directional solidification and its mechanism of impurity removal

A Novel Strategy for the Simultaneous Recovery of Silicon and Copper from Spent Silicon Contact Mass

Novel application of high temperature solution growth method in simultaneously preparing SiC/Ti 3 SiC 2 /TiC using photovoltaic Si waste and Ti-bearing blast furnace slag