Abstract:Pyrochlore structure material (A2B2O7) has gained interest in diverse applications like catalysis, nuclear waste encapsulation, sensors, and various electronic devices due to the unique crystal structure, electrical property, and thermal stability. This review deals with the ionic/electronic conductivity of numerous pyrochlore structure materials (titanates, zirconates, hafnates, stannates, niobates, ruthenates, and tantalite based pyrochlore) as electrolyte and electrode materials for solid oxide fuel cells (SOFCs). The impact of cation radius ratio (rA/rB) on the lattice constant and oxygen ‘x’ parameter of different pyrochlore structure materials obtained by various synthesis methods are reported. Higher ionic conductivity is essential for better ion transport in an electrolyte, and mixed ionic and electronic conductivity in electrode is essential for attaining higher efficiency in a typical SOFC. GdxTi2O7-δ, Gd2-xCaxTi2O7-δ, Nd2-yGdyZr2O7, Y2Zr2O7, Y2Zr2-xMnxO7-δ, SmDy1-xMgxZr2O7-x/2, Gd2-xCaxTi2O7-δ pyrochlore are reported as electrolytes for fuel cell applications. Some pyrochlore material (La2-xCaxZr2O7, Sm2-xMxTi2O7 (M = Mg, Co, and Ni) pyrochlore) shows protonic conductivity at lower temperatures and ionic conductivity at higher temperature condition. Also, the mixed ionic-electronic conductivity behavior is reported in electrode materials for SOFC such as R2MnTiO7 (R = Er and Y), R2MnRuO7 (R = Tb, Dy, Ho, Er, Tm, Yb, Lu, and Y), R2Ru2O7 (R = Bi, Pb and Y), Y2-xPrxRu2O7, Ni-(Gd0.9Ca0.1)2Ti2O7-δ, (Gd0.9Ca0.1)2Ti2O7-δ, Gd2(Ti0.8Ru0.2)2O7-δ, (Sm0.9Ca0.1)2Ti2O7-δ and (Y0.9Ca0.1)2Ti2O7-δ pyrochlore. The detailed study of the electronic behavior of these pyrochlore system confirms the necessity of defect structure with high oxygen mobility, lower activation energy, ionic radii ratio criterion should satisfy, and possess notable ion-ion interaction. Ionic conductivity in pyrochlore is increased by enhancing the oxygen migration through 48f-48f site with the formation of oxygen vacancy. Vacancy formation can be achieved by adding a suitable dopant that creates oxygen vacancy by charge compensation mechanism or as anion Frenkel defects. Similarly, the electrical conductivity is improved while adding suitable dopant (Ce, Pr, Ru, etc.) due to disordered structure and anti-Frenkel defect formation which leads to oxygen vacancy formation and thus improves conductivity.

Preparation and electrical properties of pyrochlore R2(ZrTi)O7 for solid oxide fuel cell electrolyte

Potential of pyrochlore structure materials in solid oxide fuel cell applications

Oxygen–Ion Conductivity, Dielectric Properties and Spectroscopic Characterization of “Stuffed” Tm2(Ti2−xTmx)O7−x/2 (x = 0, 0.1, 0.18, 0.28, 0.74) Pyrochlores

Structural and electrical studies of Nd and Gd co-doped zirconia electrolytes for IT-SOFC applications

Characterization of one-step co-fired BaZr0.8Y0.2O3-δ-La2Ce2O7 composite electrolyte for low-temperature solid oxide fuel cells

Synthesis and Characterization of Gadolinium-Doped Zirconia as a Potential Electrolyte for Solid Oxide Fuel Cells

Properties of Yttria Doped Zirconia Electrolyte with Li2O Additive

Conductivity Of Yttria-Doped Ceria Electrolyte Made By Chemical Coprecipitation And Its Evaluation For Sofc Application

Electrochemical Performance and Stability of Sr-doped LaMnO 3 -Infiltrated Yttria Stabilized Zirconia Oxygen Electrode for Reversible Solid Oxide Fuel Cells

BaZr0.1Ce0.7Y0.2O3−δ Proton-Conducting Electrolyte Prepared by Gel-Casting for Low-Temperature Solid Oxide Fuel Cells

Direct synthesis of Ce0.8Sm0.2−xZnxO2−δ electrolyte by sol–gel for IT-SOFC

Investigation of structural, electrical and electrochemical properties of La0.8Sr0.2Mn1−xScxO3−δ as cathode on yttria-stabilized zirconia electrolyte for intermediate temperature solid oxide fuel cell fabricated by one step dry pressing method

Ceramic Materials for Solid Oxide Fuel Cell

Electrode Performance and Analysis of Reversible Solid Oxide Fuel Cells with Proton Conducting Electrolyte of BaCe0.5Zr0.3Y0.2O3−δ

An investigation on novel electrolyte materials with scheelite structure for solid oxide fuel cells

Fabrication and Performance of Pr-doped CeO2 Nanorods-Impregnated Sr-doped LaMnO3–Y2O3-stabilized ZrO2 Composite Cathodes for Intermediate Temperature Solid Oxide Fuel Cells

Synthesis and Characterization of (gd, Y)-Doped Ceria Electrolytes for Solid Oxide Fuel Cell

Electrical properties of CeO2-Y2O3 electrolyte SOFCs

In situ drop-coated BaZr0.1Ce0.7Y0.2O3-δ electrolyte-based proton-conductor solid oxide fuel cells with a novel layered PrBaCuFeO5+δ cathode

Nb and Pd co-doped La0.57Sr0.38Co0.19Fe0.665Nb0.095Pd0.05O3-δ as a stable, high performance electrode for barrier-layer-free Y2O3-ZrO2 electrolyte of solid oxide fuel cells

Yb2o3 Doped Zr0.92y0.08o2-(8ysz) And Its Composite Electrolyte For Intermediate Temperature Solid Oxide Fuel Cells