Abstract:Solid-oxide fuel cells (SOFCs) technology has a substantial potential in the application of clean and efficient electric power generation. However, the widespread utilization of SOFCs has not been realized because the cost associated with cell fabrication, materials and maintenance is still too high. To increase its competitiveness, lowering the operation temperature to the intermediate range of around 500–800°C is one of the main goals in current SOFCs research. A major challenge is the development of cell materials with acceptably low ohmic and polarization losses to maintain sufficiently high electrochemical activity at reduced temperatures. During the past few decades, tremendous progress has been made in the development of cell materials and stack design, which have been recently reviewed. SOFCs are fabricated from ceramic or cermet powders. The performances of SOFCs are also closely related to the ways in which the cell materials are processed. Therefore, the optimization of synthetic processes for such materials is of great importance. The conventional solid-phase reaction method of synthesizing SOFCs materials requires high calcination and sintering temperatures, which worsen their microstructure, consequently, their electrochemical properties. Various wet chemical routes have recently been developed to synthesize submicro- to nano-sized oxide powders. This paper provides a comprehensive review on the advanced synthesis of materials for intermediate-temperature SOFCs and their impact on fuel cell performance. Combustion, co-precipitation, hydrothermal, sol–gel and polymeric-complexing processes are thoroughly reviewed. In addition, the parameters relevant to each synthesis process are compared and discussed. The effect of different processes on the electrochemical performance of the materials is evaluated and optimization of the synthesis processes is discussed and some emerging synthetic techniques are also briefly presented.

Ceramic Materials for Solid Oxide Fuel Cell

Review of solid oxide fuel cell materials: cathode, anode, and electrolyte

Solid oxide fuel cell: Materials for anode, cathode and electrolyte

Designing Proton Conducting Electrolytes for Low-Temperature Ceramic Fuel Cells

Non-doped CeO2-carbonate nanocomposite electrolyte for low temperature solid oxide fuel cells

Doped Zirconia/Ceria Electrolyte Fabricated at Low Temperature

High-performing and stable non-doped ceria electrolyte with amorphous carbonate coating layer for low-temperature solid oxide fuel cells

Ceria-carbonate Electrolyte Ceramic Membrane for Intermediate and Low Temperature Solid Oxide Fuel Cells: A Review

Advanced synthesis of materials for intermediate-temperature solid oxide fuel cells

Fabrication of nanoscale yttria stabilized zirconia for solid oxide fuel cell

High Performance Low-Temperature Solid Oxide Fuel Cells Based on Nanostructured Ceria-Based Electrolyte

Development of Solid Oxide Fuel Cell Materials for Intermediate-to-low Temperature Operation

Enhancement of Conductivity in Phase Pure and Doped Ceria for Fuel Cell Applications

Synthesis and Physicochemical Characterization of Solid Oxide Electrolyte and Electrode Materials for Medium-Temperature Fuel Cells

Recent Progress on Advanced Materials for Solid‐Oxide Fuel Cells Operating below 500 °C

Characterization of one-step co-fired BaZr0.8Y0.2O3-δ-La2Ce2O7 composite electrolyte for low-temperature solid oxide fuel cells

High Performance Solid Oxide Fuel Cells Based on Tri-Layer Yttria-Stabilized Zirconia by Low Temperature Sintering Process

Simple Solid Oxide Fuel Cells

Processing of high-performance Co doped Y2O3 as a single-phase electrolyte for low temperature solid oxide fuel cell (LT-SOFC)

Recent advances on electrolyte materials for SOFC: A review

Direct synthesis of Ce0.8Sm0.2−xZnxO2−δ electrolyte by sol–gel for IT-SOFC