Abstract:It is known that the interest in manufacturing in a vacuum environment has increased in recent years. Thus, the wear behavior of mechanical tools under vacuum conditions has critical importance. However, adhesion and cold-welding problems between tool and working piece in vacuum conditions lead to poor wear properties and severe coefficient of friction values. Surface treatment methods such as physical vapor deposition coatings can eliminate these undesirable consequences, especially transition metal nitrides. In this study, TiAlN, TiSiN, and TiAlN/TiSiN films were coated on AISI H13 tool steels employing the cathodic arc evaporation technique. Whether the coatings grown to the substrate surface have a positive contribution to the wear performance of the substrate in the ambient air and vacuum environment was answered. Scanning electron microscope, energy dispersive spectrometer, and X-ray diffractometer analyses were used to attain structural properties. The hardness was measured using a nano-hardness tester, and the adhesion properties were determined by a scratch test. The wear behavior of the substrate and coating samples are determined under 2 N constant normal load and using WC-6%Co counter bodies under ambient air and vacuum conditions. The hardness of samples improved owing to surface coatings, and the highest nano-hardness value was determined from the TiSiN coatings as 39.42 GPa, which is ∼700% greater than the substrate. It has been observed that coated samples have superior wear performance in both wear conditions. Besides, it is determined that those tested under a vacuum condition showed superior wear resistance than the samples tested under ambient air. While TiSiN film exhibits the highest wear resistance in ambient air, the TiAlN/TiSiN layer is the best in a vacuum environment. Owing to the deposited coatings, the seizure mechanism between the friction surfaces, which is frequently encountered in the vacuum environment, is prevented, and a fascinating improvement in terms of friction coefficient is achieved.

Friction and wear behaviors of TiCN coating based on electrical discharge coating

Preparation and Tribological Properties of the Carbon Nanotubes–ni–p Composite Coating

Influence of Carbon Contents on the Structure and Tribocorrosion Properties of Tisicn Coatings on Ti6al4v

Investigations on microstructure, mechanical and tribological properties of TiN coatings deposited on three different tool materials

Study on the growth and wear characters of CVD coating deposited on Ti(C, N)-based cermets with adding different C/N ratios of Ti(C, N) powders

Nanoindentation and Tribological Behavior of TiN-TiCN-TiAlN Multilayer Coatings on AISI D3 Tool Steel

Sliding friction behaviors of TiCN/Cr 3 C 2 -NiCr and TiCN/WC-CoCr duplex coatings fabricated by combining HVOF and HT-CVD procedures

Friction and Wear Behavior of Electroless Ni-Based Cnt Composite Coatings

Characterisation of TiCN Coatings for Biomedical Applications

FRICTION AND WEAR PERFORMANCE OF AN ELECTROSPARK-DEPOSITED Ta COATING ON CrNi3MoVA ST

Friction and wear behaviors of electrodeposited Ni-P-CNTs composite coatings on Al-alloy substrate

Corrosion and wear resistance of TiN/TiO2 composite ceramic coatings deposited by supersonic arc spraying

Friction and wear behavior of Ni-P-carbon nanotubes (CNTs) electroless composite coating

Tribological interactions between TiN PVD coating and MoDTC under boundary lubrication conditions

Friction and wear behavior of Ni-based alloy coatings with different amount of WC–TiC ceramic particles

Wear performance under dry and lubricated conditions of duplex treatment TiN/TiCrN coatings deposited with different numbers of CrN interlayers on steel substrates

A comparative study of hardness/scratch/wear properties of TiCN and TiAlN coatings on DIN 1.2842 steel by CA-PVD method

Electrochemical and Tribological Properties of TiSiCN Coatings in Coolant

Pulsed Electrode Surfacing of Steel with TiC Coating: Microstructure and Wear Properties

Comparative Study of Tribological Behavior of TiN Hard Coatings Deposited by Various PVD Deposition Techniques

Tribological properties of in-situ PVD TiAlN, TiSiN, and TiAlN/TiSiN coatings under ambient air and vacuum environment