Abstract:This paper assessed the growth of CVD composite coatings on three kinds of cermets and the subsequent high-temperature frictional properties. The carbon to nitrogen ratios (C: N) of Ti(C1-x, Nx) powders added to these three cermets were 5:5,7:3 and 10:0, respectively. It was prepared by powder metallurgy. The TiN/α-Al2O3/Ti(C, N)/TiN multilayer coatings were deposited on different Ti(C, N)-based cermets. The results showed that the crystallinity of the composite coating was affected by the contents of nitrogen content. The inner layer TiN coating exhibited a nano-columnar crystal structure, which detected (111) and (200) orientation texture by XRD. The α-Al2O3 coating and Ti(C, N) coating of the three specimens were coarse columnar crystal structures. The variation in the nitrogen content led to the different performances of the coating. Meanwhile, The CVD coating with a C/N ratio of 7:3 had the best comprehensive properties, because the substrate had similar grain-forming directions and more shape nucleation points. The Electron Backscattered Diffraction (EDSB)、Scanning Electron Microscope (SEM) and Energy Dispersive Spectrometer (EDS) were used to further analyze the microstructure of the samples. The Coating Al2O3 displayed excellent mud (100) value, which indicated that the preferred texture (100) existed and improved the performance of the Al2O3 coating. The adhesion strength of the composite coating on Ti(C0.7, N0.3)-based cermets is the highest. The high-temperature friction wear of the coating was further investigated. Group Y2, which expressed the sample of Ti(C0.7, N0.3)-based cermets CVD coating, demonstrated the lowest wear rate. All control groups’ wear mechanisms included abrasive wear, diffusion wear, and oxidation wear.

Study on the growth and wear characters of CVD coating deposited on Ti(C, N)-based cermets with adding different C/N ratios of Ti(C, N) powders

Study on the growth and wear behavior of the TiAlN-based composite coating deposited on TiCN-based cermets with different binder phase

Influence of Carbon Contents on the Structure and Tribocorrosion Properties of Tisicn Coatings on Ti6al4v

Growth and properties of multi-layer nano CrAlN/TiAlN composite coating on the cermets with CrFeCoNiMo, CrFeCoNiMn, CrFeCoNiAl high entropy alloy phase

Investigations on microstructure, mechanical and tribological properties of TiN coatings deposited on three different tool materials

Friction and wear behavior of Ti(C,N) self-lubricating cermet materials with multilayer core-shell microstructure

Effect of Nitrogen Protective Atmosphere on Microstructure and High Temperature Erosion Property of TiAl3 and Cr3C2 Composite Coatings

Research On Wear Behavior Of Atc Cermet Material

Effects of CrMnFeCoNi additions on microstructure, mechanical properties and wear resistance of Ti(C,N)-based cermets

Microstructure, mechanical properties and cutting performance of super-hard Ti(B,C,N) coatings prepared by chemical vapor deposition method

Microstructural Evolution and Wear Behaviors of NbC-reinforced Ti-based Composite Coating

Microstructure and Tribological Behaviour of Super-Hard Ti–Si–C–N Nanocomposite Coatings Deposited by Plasma Enhanced Chemical Vapour Deposition

Growth, mechanical properties, and tribological performance of TiAlN/NbN and NbN/TiAlN bilayer coatings

Effect of C doping on structure and properties of TiAlCrN coatings by filter cathode vacuum arc deposition

Transmission Electron Microscopy Microstructural Characterization of Ti–Si–C–N Coatings

EFFECT OF THE N2/Ar FLOW RATIO ON THE MICROSTRUCTURE AND MECHANICAL PROPERTIES OF TiSiCN COATINGS

Effects of nano-Al2O3 addition on microstructure, mechanical properties, and wear resistance of Ti(C, N)-based cermets

Tribological and Corrosion Properties of the CoCrAlYTaSiC-xCNTs Coatings Deposited by Laser Cladding

Effect of SiC and TiC content on microstructure and wear behavior of Ni-based composite coating manufactured by laser cladding on Ti-6Al-4V

Microstructure evolution, mechanical and abrasive wear properties of NiCrSiB-SiC composite coatings prepared on 16Mn low-carbon steel by Ni-based alloy catalyzed SiC decomposition

Improved wear resistance of TiAl composite coatings through NbC@(Ti,Nb) 2 AlC core-shell structure and nanoscale precipitation strengthening