Abstract:Some components made of titanium alloys will serve in corrosive environments in the industry, and suffer from corrosion and wear at the same time. However, the components exhibit the high wear and corrosion rates due to their low hardness and the extremely thin oxidation film formed on their surfaces, which can accelerate their failure and reduce their service life. In response to this situation, CoCrFeNiNb high-entropy alloys (HEAs) coatings with Y2O3 (0 wt.%, 1 wt.%, 2 wt.%, and 3 wt.%) were successfully prepared on Ti6Al4V by laser cladding. The effects of Y2O3 addition content on the microstructure, corrosion and mechanical properties were investigated comprehensively by X-ray diffractometry (XRD), scanning electron microscopy (SEM), energy-dispersive spectroscopy (EDS), microhardness tests, electrochemical tests and tribocorrosion tests in this work. Other than them, tribocorrosion behaviors of the coatings were especially highlighted in two different environments (neutral (pH 7) and acid (pH 3) solutions). The results showed the significant enhancement in microhardness with the introduction of Y2O3 due to the microstructural refinement and the formation of Laves phase Cr2Nb in the coatings. The coating with 2 wt.% Y2O3 performed the most excellent corrosion resistance (neutral solution: Ecorr=-0.12 V; acid solution: Ecorr=0.043 V) increased by 55.5% and 115.0% of the coating without Y2O3. As well as, the coating also demonstrated the lowest wear rates (neutral solution: 3.32×10−4 mm3·N−1·m−1; acid solution: 2.24×10−4 mm3·N−1·m−1) reduced by 17.8% and 33.3% of the coating without Y2O3. The superior tribocorrosion resistance and corrosion resistance make CoCrFeNiNb+2 wt.% Y2O3 HEA coating show a tremendous potential in aerospace and marine applications application.

Tailoring the tribo-corrosion response of (CrNbTiAlV)CxNy coatings by controlling carbon content

Influence of Carbon Contents on the Structure and Tribocorrosion Properties of Tisicn Coatings on Ti6al4v

Tribological and Corrosion Properties of the CoCrAlYTaSiC-xCNTs Coatings Deposited by Laser Cladding

Microstructure, mechanical properties and tribo-corrosion mechanism of (CrNbTiAlVMo) x N 1-x coated 316 L stainless steel in 3.5 wt.% NaCl solution

Structure and Tribological Properties of CrTiAlCN Coatings with Various Carbon Contents

Mechanical, Tribological, and Corrosion Resistance Properties of (TiAlxCrNbY)Ny High-Entropy Coatings Synthesized Through Hybrid Reactive Magnetron Sputtering

Effect of C doping on structure and properties of TiAlCrN coatings by filter cathode vacuum arc deposition

Tribological and Corrosion Behaviors of Zr-doped Graphite-Like Carbon Nanostructured Coatings on Ti6Al4V Alloy

Effects of C content on the microstructure, mechanical and tribological properties of TiAlSiCN coatings

Improving high-temperature wear resistance of arc-evaporated AlCrN coatings by Mo alloying

Investigation into tribocorrosion behaviors of CoCrFeNiNb laser-clad coatings with Y2O3

High-Temperature Wear Behavior and Mechanisms of Self-Healing NiCrAlY-Cr3C2-Ti2SnC Coating Prepared by Atmospheric Plasma Spraying

Improvement of Tribological Performance of TiAlNbN Hard Coatings by Adding AlCrN

Study on the growth and wear characters of CVD coating deposited on Ti(C, N)-based cermets with adding different C/N ratios of Ti(C, N) powders

Corrosion and friction resistance of TiVCrZrWNx high entropy ceramics coatings prepared by magnetron sputtering

Structure and tribocorrosion behavior of CrMoSiCN nanocomposite coating with low C content in artificial seawater

Study on the Wear and Corrosion Resistance of CoCrFeNiTi0.8-xcBN Laser Cladding Coatings

Study on Wear and Friction Resistance of CrTiAlMoN Coatings Deposited by Magnetron Sputtering

Effect of C/N incorporation on structural and crystallographic properties of TaNbZr coatings deposited by double-glow plasma surface alloying on Ti-alloy substrate

Tribological properties of self-healing NiCrAlY/Cr3C2-Ti3AlC2 coating at high temperatures

The collaborative effect of carbon-borides and the redistribution of Ni, Cr and Mo on the corrosion and wear resistance of NiCrMoCB coatings