Abstract:This study investigates the band alignment of the Zn0.8Mg0.2O/Sb2Se3 interface structure to improve solar cell application. Zn0.8Mg0.2O/Sb2Se3 interface exhibits a delta conduction band offset (ΔCBO) value of +0.193 eV, as obtained via the interface‐induced band bending method, with a spike structure. The findings of this study can help improve the Voc of Sb2Se3 solar cells by optimizing ΔCBO. This study investigates the band alignment of the Zn0.8Mg0.2O/Sb2Se3 interface structure to improve solar cell performance. Sb2Se3 is a promising absorber material. However, Sb2Se3 solar cells exhibit a lower conversion efficiency than CuInGaSe2 and CdTe solar cells. The lower efficiency of Sb2Se3 solar cells is attributed to the severe open‐circuit voltage loss caused by the band structure at the buffer/Sb2Se3 interface. Sb2Se3 solar cells typically employ CdS as the buffer layer, and the CdS/Sb2Se3 interface exhibits a cliff structure, which results in interfacial recombination. By contrast, a ZnMgO buffer layer can form a spike structure with Sb2Se3 at their interface, which reduces recombination and, as a result, enhances conversion efficiency. Therefore, this study employs the ZnMgO buffer layer and analyzes their material properties with various Mg contents and band structure at buffer/absorber layer interface. A ZnMgO buffer layer is sputter‐deposited on Sb2Se3. The optical bandgap of ZnMgO is 3.3–3.72 eV, corresponding to an Mg content of 0–0.35 at%. The carrier concentration indicates an appropriate doping level ranging from 1014 to 1016 cm−3. The Zn0.8Mg0.2O/Sb2Se3 interface is characterized via interface‐induced band bending. The Zn0.8Mg0.2O/Sb2Se3 interface exhibits a spike structure with a positive delta conduction band offset of +0.193 eV.

Characterizing ZnMgO/Sb2Se3 Interface for Solar Cell Applications

Analysis of Carrier Transport at Zn1-xSnxOy/Absorber Interface in Sb2(S,Se)3 Solar Cells

Optimizing interface energy band alignment in Cd-free Sb2Se3 solar cells by controlling the oxygen content of In2(O,S)3 buffer layer to improve the efficiency: A simulation study

Influences of Mg concentration in ZnMgO film on energy band alignment at CIGSSe/Zn1-xMgxO interface and performances of CIGSSe solar cells

Electrical barriers and their elimination by tuning (Zn,Mg)O composition in Cu(In,Ga)S2: Systematic approach to achieve over 14% power conversion efficiency

Influence of Mg concentration in Zn1-Mg O buffer layers for enhanced Cu2(Sn,Ge)S3 solar cells performance

Reactively Sputtered CdS:O Buffer Layers for Substrate Sb2Se3 Solar Cells

Interface passivation and band alignment of high efficiency Cu(In, Ga)Se2 solar cells: Application of Mo(OxSe1-x)2 buffer layer at Mo/ Cu(In, Ga)Se2 interface

Energy Band Alignment at p-n Heterojunction Interface in CZTSSe Solar Cells with Novel ZnMgO Buffer Layer

Enhancement of Cd-Free All-Dry-Processed Cu(In1-x,Gax)Se2 Thin-Film Solar Cells by Simultaneous Adoption of an Enlarged Bandgap Absorber and Tunable Bandgap Zn1-xMgxO Buffer

The Energy Level Alignment at the Buffer/Cu(In,Ga)Se2 Thin‐Film Solar Cell Interface for CdS and GaOx

CdS(In)/CZTSSe bandgap alignment engineering for performance enhancement of solar cells without ZnO layer

High-efficient Sb 2 Se 3 solar cell using Zn x Cd 1- x S n-type layer

Influence of Sulfur Content in Zn(O,S) Buffer Layer onto Copper Indium Gallium Sulfur-Based Solar Cells Through Surface Engineering at ZnO1−xSx/CIGS Interface

Carrier Transport Enhancement Mechanism in Highly Efficient Antimony Selenide Thin‐Film Solar Cell

Improved Open‐Circuit Voltage of Sb 2 Se 3 Thin‐Film Solar Cells Via Interfacial Sulfur Diffusion‐Induced Gradient Bandgap Engineering

In Situ Investigation of Interfacial Properties of Sb2Se3 Heterojunctions

Atomic-Scale Interface Modification Improves the Performance of Cu(In1- xGax)Se2/Zn(O,S) Heterojunction Solar Cells

Interfacial Engineering to Improve Cu2ZnSnX4 (X = S, Se) Solar Cell Efficiency

Performance enhancement of Sb 2 Se 3 -based solar cell with IGZO and n-ZnO as electron transport layers

Doping Behavior of Zn in CdS and Its Effect on the Power Conversion Efficiency of the Cu2ZnSn(S, Se)4 Solar Cell