Carrier Transport Enhancement Mechanism in Highly Efficient Antimony Selenide Thin‐Film Solar Cell

Yandi Luo,Guojie Chen,Shuo Chen,Nafees Ahmad,Muhammad Azam,Zhuanghao Zheng,Zhenghua Su,Michel Cathelinaud,Hongli Ma,Zhigang Chen,Ping Fan,Xianghua Zhang,Guangxing Liang

DOI: https://doi.org/10.1002/adfm.202213941

IF: 19

2023-01-17

Advanced Functional Materials

Abstract:An effective strategy of Al3+ cation doping on CdS buffer layer is introduced in Sb2Se3 solar cells. The optimized band alignment, suppressed interface recombination, and enhanced carrier transport, result in the improvement of device performance. Consequently, the champion Sb2Se3/CdS:Al device delivers interesting power conversion efficiency of 8.41%, accompanied with significant increase of short‐circuit current density to 28.26 mA cm−2 compared with un‐doped counterpart. Exhibiting outstanding optoelectronic properties, antimony selenide (Sb2Se3) has attracted considerable interest and has been developed as a light absorber layer for thin‐film solar cells over the decade. However, current state‐of‐the‐art Sb2Se3 devices suffer from unsatisfactory "cliff‐like" band alignment and severe interface recombination loss, which deteriorates device performance. In this study, the heterojunction interface of an Sb2Se3 solar cell is improved by introducing effective aluminum (Al3+) cation into the CdS buffer layer. Then, the energy band alignment of Sb2Se3/CdS:Al heterojunction is modified from a "cliff‐like" structure to a "spike‐like" structure. Finally, heterojunction interface engineering suppresses recombination losses and strengthens carrier transport, resulting in a high efficiency of 8.41% for the substrate‐structured Sb2Se3 solar cell. This study proposes a facile strategy for interfacial treatment and elucidates the related carrier transport enhancement mechanism, paving a bright avenue to overcome the efficiency bottleneck of Sb2Se3 thin‐film solar cells.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology

What problem does this paper attempt to address?

Carrier Transport Enhancement Mechanism in Highly Efficient Antimony Selenide Thin‐Film Solar Cell

An effective engineering with simultaneous carrier density enhancement and interface optimization enables efficient Sb2Se3 solar cells

Suppressing Buried Interface Nonradiative Recombination Losses Toward High-Efficiency Antimony Triselenide Solar Cells

Suppressing Buried Interface Nonradiative Recombination Losses Towards High‐efficiency Antimony Triselenide Solar Cells

Interfacial Engineering Towards Enhanced Photovoltaic Performance of Sb2Se3 Solar Cell

Regulating Energy Band Alignment via Alkaline Metal Fluoride Assisted Solution Post‐Treatment Enabling Sb 2 (S,Se) 3 Solar Cells with 10.7% Efficiency

Optimizing Crystal Orientation and Defect Mitigation in Antimony Selenide Thin-Film Solar Cells through Buffer Layer Energy Band Adjustment

Regulating Energy Band Alignment Via Alkaline Metal Fluoride Assisted Solution Post‐Treatment Enabling Sb2(S,Se)3 Solar Cells with 10.7% Efficiency

1D/3D Alloying Induced Phase Transition in Light Absorbers for Highly Efficient Sb2Se3 Solar Cells

Heterostructured CdS Buffer Layer for Sb2Se3 Thin Film Solar Cell

Heterojunction Lithiation Engineering and Diffusion-Induced Defects Passivation for Highly Efficient Sb2(S,Se)3 Solar Cells

Heterojunction Lithiation Engineering and Diffusion-Induced Defect Passivation for Highly Efficient Sb2(S,Se)3 Solar Cells

Hydrazine Hydrate‐Induced Surface Modification of CdS Electron Transport Layer Enables 10.30%‐efficient Sb2(S,Se)3 Planar Solar Cells

Interface Etching Leads to the Inversion of the Conduction Band Offset Between the CdS/Sb2Se3 Heterojunction and High-Efficient Sb2Se3 Solar Cells

Interface engineering of antimony selenide solar cells: A review on the optimization of energy band alignments

Regulating Energy Band Alignment via Alkaline Metal Fluoride Assisted Solution Post‐Treatment Enabling Sb <sub>2</sub> (S,Se) <sub>3</sub> Solar Cells with 10.7% Efficiency

Tellurium Doping Inducing Defect Passivation for Highly Effective Antimony Selenide Thin Film Solar Cell

Enhanced charge carrier transport via efficient grain conduction mode for Sb2Se3 solar cell applications

Simultaneous Band Alignment Modulation and Carrier Dynamics Optimization Enable Highest Efficiency in Cd‐Free Sb2Se3 Solar Cells

Heterojunction Interface Engineering of C60 Electron Transport Layer Insertion Enables Efficient Cd-Free Sb2se3 Solar Cells

Improvement in Sb2Se3 Solar Cell Efficiency Through Band Alignment Engineering at the Buffer/Absorber Interface.