Abstract:Herein, triethanolamine additive is innovatively utilized to regulate the hydrothermal process of Sb2(S,Se)3 thin film. Ultimately, the longitudinal Se/(S+Se) ratio of Sb2(S,Se)3 thin film is well controlled. The enhanced vertical crystal orientations, the uniformed back surface gradient, the suppressed over band bending at PN junction and the passivated harmful VSe1 defects leading to an efficiency of 9.94% for Sb2(S,Se)3 solar cell. Antimony selenosulfide (Sb2(S,Se)3) solar cells have achieved an efficiency of over 10.0%. However, the uncontrollable hydrothermal process makes preparing high‐quality Sb2(S,Se)3 thin films a bottleneck for efficient Sb2(S,Se)3 solar cell. To address this problem, triethanolamine (TEA) additive is innovatively utilized to regulate the reaction kinetic process of Sb2(S,Se)3 thin films in this work. The results show that TEA chelator can realize the time‐domain control of the reaction process, optimizing the Se/(S+Se) elemental distribution of Sb2(S,Se)3 thin film and shrinking the bandgap offset of Sb2(S,Se)3 thin film. Meanwhile, the (021) and (061) crystal orientation of Sb2(S,Se)3 thin film are enhanced and the harmful VSe1 defects in Sb2(S,Se)3 solar cells are passivated. Interestingly, a uniform back surface gradient for Sb2(S,Se)3 thin film is formed to reduce the minority carrier recombination at the back contact, increase the photocurrent and decrease the diode current of Sb2(S,Se)3 solar cells. Finally, the Jsc and FF of Sb2(S,Se)3 solar cells are significantly improved by 8.6% and 5.5% respectively, and the open‐circuit voltage deficit of the device is reduced by 44 mV, which leads to an efficiency of 9.94% which is the highest values of Sb2(S,Se)3 solar cells by sodium selenosulfate system.

An effective engineering with simultaneous carrier density enhancement and interface optimization enables efficient Sb2Se3 solar cells

Carrier Transport Enhancement Mechanism in Highly Efficient Antimony Selenide Thin‐Film Solar Cell

Suppressing Buried Interface Nonradiative Recombination Losses Towards High‐efficiency Antimony Triselenide Solar Cells

Interfacial engineering for high efficiency solution processed Sb2Se3 solar cells

An Optimization Path for Sb2(S,Se)3 Solar Cells to Achieve an Efficiency Exceeding 20

Achievable efficiency improvement of Sb2Se3 thin-film solar cells through interface engineering

Solution-processed SnO2 interfacial layer for highly efficient Sb2Se3 thin film solar cells

Regulating Energy Band Alignment via Alkaline Metal Fluoride Assisted Solution Post‐Treatment Enabling Sb 2 (S,Se) 3 Solar Cells with 10.7% Efficiency

Heterojunction Lithiation Engineering and Diffusion-Induced Defects Passivation for Highly Efficient Sb2(S,Se)3 Solar Cells

Enhanced Sb2Se3 Solar Cell Performance Through Theory-Guided Defect Control

Fabricating High‐Efficiency Sb2(S,Se)3 Solar Cells by Novel Additive‐Assisted Longitudinal Component Engineering

Sputtered and Selenized Sb2Se3 Thin-Film Solar Cells with Open-Circuit Voltage Exceeding 500 Mv

Se-Elemental Concentration Gradient Regulation for Efficient Sb2(S,Se)3 Solar Cells With High Open-Circuit Voltages

Interface engineering of antimony selenide solar cells: A review on the optimization of energy band alignments

Tellurium Doping Inducing Defect Passivation for Highly Effective Antimony Selenide Thin Film Solar Cell

Optimizing Crystal Orientation and Defect Mitigation in Antimony Selenide Thin-Film Solar Cells through Buffer Layer Energy Band Adjustment

Back contact interfacial modification mechanism in highly-efficient antimony selenide thin-film solar cells

Enhancement in the Efficiency of Sb2Se3 Solar Cells by Triple Function of Lithium Hydroxide Modified at the Back Contact Interface

An effective combination reaction involved with sputtered and selenized Sb precursors for efficient Sb2Se3 thin film solar cells

Sputtering Al2O3 as an effective interface layer to improve open-circuit voltage and device performance of Sb2Se3 thin-film solar cells

Crystal Growth Promotion and Defect Passivation by Hydrothermal and Selenized Deposition for Substrate-Structured Antimony Selenosulfide Solar Cells