Abstract:Sb2Se3 is an emerging and promising light-absorbing material with superior photovoltaic properties. However, the specific one-dimensional structure of Sb2Se3 limits the doping density, preventing a high built-in potential. Moreover, in the superstrate devices the back contact is often non-ohmic. In this work, we have successfully applied tungsten oxide (WO3-x) as a hole-transport layer in superstrate n-i-p Sb2Se3 solar cells. It is found that an interfacial dipole is formed at Sb2Se3/WO3-x interface via Sb–W bonds, which reduces the barrier for hole extraction. Meantime, gap states are present at a suitable energy level to serve as intermediate states for hole-transport from the Sb2Se3 absorber to the metal anode. In addition, the introduction of WO3-x can suppress carrier recombination at the back interface, enhance the built-in potential, and improve the spectral response in the long-wavelength region. Consequently, the superstrate devices with the incorporated WO3-x layer achieve a champion efficiency of 7.10% due to the enhancement of all device parameters. Furthermore, the all-inorganic devices with WO3-x hole-transport layer exhibit excellent air stability and thermal stability.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c10629?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c10629</a>.XPS, SEM of WO3-x films; Tauc plots for band gap calculation of WO3-x film; integrated Jsc; current density–voltage (J–V) curves measured in both forward and reverse scan directions; dV/dJ with the fit used to determine R; cross-sectional SEM and AFM of Sb2Se3 films covered with WO3-x layers; the Voc, Jsc, and FF evolution (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c10629/suppl_file/am0c10629_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Back contact interfacial modification mechanism in highly-efficient antimony selenide thin-film solar cells

Suppressing Buried Interface Nonradiative Recombination Losses Towards High‐efficiency Antimony Triselenide Solar Cells

Back Contact Interfacial Modification in Highly-Efficient All-Inorganic Planar n-i-p Sb 2 Se 3 Solar Cells

Carrier Transport Enhancement Mechanism in Highly Efficient Antimony Selenide Thin‐Film Solar Cell

An effective engineering with simultaneous carrier density enhancement and interface optimization enables efficient Sb2Se3 solar cells

Hydrazine Hydrate‐Induced Surface Modification of CdS Electron Transport Layer Enables 10.30%‐efficient Sb2(S,Se)3 Planar Solar Cells

An Optimization Path for Sb2(S,Se)3 Solar Cells to Achieve an Efficiency Exceeding 20

Solution-processed SnO2 interfacial layer for highly efficient Sb2Se3 thin film solar cells

Sputtered and Selenized Sb2Se3 Thin-Film Solar Cells with Open-Circuit Voltage Exceeding 500 Mv

Sb2Se3 thin film solar cells in substrate configuration and the back contact selenization

Optimizing Crystal Orientation and Defect Mitigation in Antimony Selenide Thin-Film Solar Cells through Buffer Layer Energy Band Adjustment

Interfacial Engineering by Self‐Assembled Monolayer for High‐Performance Sb2S3 Solar Cells

Interface engineering of antimony selenide solar cells: A review on the optimization of energy band alignments

Flexible Substrate‐Structured Sb2S3 Solar Cells with Back Interface Selenization

Defect control for high efficiency antimony selenosulfide solar cells by interface Engineering of buried monoatomic aluminum oxide layer

Crystal Growth Promotion and Defect Passivation by Hydrothermal and Selenized Deposition for Substrate-Structured Antimony Selenosulfide Solar Cells

Enhancement in the Efficiency of Sb2Se3 Solar Cells by Triple Function of Lithium Hydroxide Modified at the Back Contact Interface

Selective preferred orientation for high-performance antimony selenide thin-film solar cells via substrate surface modulation

Enhanced Performance of the Sb 2 Se 3 Thin-Film Solar Cell by Organic Molecule-Induced Crystallization and Suppression of the Interface Recombination

Heterogeneous Nucleation Regulation Amends Unfavorable Crystallization Orientation and Defect Features of Antimony Selenosulfide Film for High‐Efficient Planar Solar Cells

Sputtering Al2O3 as an effective interface layer to improve open-circuit voltage and device performance of Sb2Se3 thin-film solar cells