Abstract:Sb2S3 is a promising environmentally‐friendly semiconductor for stable and high efficiency thin film solar cells, but, like many other polycrystalline materials, is limited by non‐radiative recombination and carrier scattering by grain boundaries. Herein, we show how the grain boundary density in Sb2S3 films can be significantly reduced from 1068±40 nm μm−2 (largest grain ∼5 μm) to 327±23 nm μm−2 (largest grain >15 μm) by incorporating an appropriate amount of Ce3+ into the precursor solution for Sb2S3 deposition. Through extensive characterization of the structural, morphological and optoelectronic properties, complemented with computations, we reveal the underlying mechanisms responsible for the increased grain size and improved photovoltaic performance of Sb2S3 solar cells. A critical factor behind the reduction in grain boundary density is the formation of an ultrathin layer of Ce2S3 at the CdS/Sb2S3 interface, which could reduce the interfacial energy and increase the adhesion work between Sb2S3 and the substrate to encourage heterogeneous nucleation of Sb2S3, as well as increase the rate of grain growth. Through a reduction in non‐radiative recombination at grain boundaries and/or the CdS/Sb2S3 heterointerface as well as improved charge‐carrier transport properties at the heterojunction, we achieved high performance Sb2S3 solar cells with a power conversion efficiency reaching 7.66%, and an open‐circuit voltage (VOC) of 796 mV. This VOC is the highest reported thus far for Sb2S3 solar cells. This work provides a strategy to simultaneously regulate the nucleation and growth of Sb2S3 absorber films via in‐situ chemical environment tuning, which can be more broadly applied to other thin film systems to improve their photovoltaic performance. This article is protected by copyright. All rights reserved

Enhanced charge carrier transport via efficient grain conduction mode for Sb2Se3 solar cell applications

Substrate dependence on (Sb4Se6)n ribbon orientations of antimony selenide thin films: Morphology, carrier transport and photovoltaic performance

Magnetron Sputtered Sb2Se3-based Thin Films Towards High Performance Quasi-Homojunction Thin Film Solar Cells

Carrier Transport Enhancement Mechanism in Highly Efficient Antimony Selenide Thin‐Film Solar Cell

Interface Etching Leads to the Inversion of the Conduction Band Offset Between the CdS/Sb2Se3 Heterojunction and High-Efficient Sb2Se3 Solar Cells

Grain Engineering of Sb2S3 Thin Films to Enable Efficient Planar Solar Cells with High Open‐Circuit Voltage

Solution-processed SnO2 interfacial layer for highly efficient Sb2Se3 thin film solar cells

Vapor Transport Deposition of Highly Efficient Sb2(S,Se)3 Solar Cells Via Controllable Orientation Growth

Heterostructured CdS Buffer Layer for Sb2Se3 Thin Film Solar Cell

Interfacial Engineering Towards Enhanced Photovoltaic Performance of Sb2Se3 Solar Cell

Ion doping simultaneously increased the carrier density and modified the conduction type of Sb<sub>2</sub>Se<sub>3</sub> thin films towards quasi-homojunction solar cell

n-Type Doping of Sb2S3 Light-Harvesting Films Enabling High-Efficiency Planar Heterojunction Solar Cells.

In Situ Seed Layer Bandgap Engineering Leading to the Conduction Band Offset Reversion and Efficient Sb2Se3 Solar Cells with High Open-Circuit Voltage

Thin-film Sb2Se3 photovoltaics with oriented one-dimensional ribbons and benign grain boundaries

Optimizing Crystal Orientation and Defect Mitigation in Antimony Selenide Thin-Film Solar Cells through Buffer Layer Energy Band Adjustment

Rotational design of charge carrier transport layers for optimal antimony trisulfide solar cells and its integration in tandem devices

Regulating the P-N Interface Quality for Sb2Se3-based Quasi-Homojunction Thin Film Solar Cells by an Effective Two-Step Heat Treatment Process

Efficient Coaxial N-I-P Heterojunction Sb2s3 Solar Cells

Solution‐Processed Sb2(S, Se)3 Seeds‐Assisted Sb2Se3 Thin Film Growth for High Efficiency Solar Cell

Heterogeneous Nucleation Regulation Amends Unfavorable Crystallization Orientation and Defect Features of Antimony Selenosulfide Film for High‐Efficient Planar Solar Cells

Mechanism of Defect Passivation in Sb2Se3 Solar Cells via Buried Selenium Seed Layer