Abstract:Self-lubricating aluminium-based composites reinforced with solid lubricants promise to meet the demand for lightweight materials in green tribological applications. The design advantages granted by additive manufacturing (AM) processes coupled with their capacity for in-situ production of composite materials are yet to be exploited in the realm of Al-transition metal dichalcogenides composites. In this work, laser powder bed fusion (LPBF) was deployed for the in-situ fabrication of Al-WS2 composites for the first time, elucidating the process-structure-property relationships in comparison to reference spark plasma sintering (SPS) samples. The WS2 response to the respective fabrication technique was also firstly investigated through a holistic characterisation. The formation of new phases (W for LPBF, Al5W and Al12W for SPS) provided the potential for microstructural tailoring for optimal tribological performance. For tribological properties, LPBF Al-WS2 exhibited a coefficient of friction (COF) 0.55±0.01 and specific wear rate 3.4±0.3×10-3 mm3/N∙m, slightly better than the SPS counterpart (COF 0.57±0.02, specific wear rate 3.6±0.3×10-3 mm3/N∙m). Furthermore, a novel methodology for studying the evolution of worn surfaces is proposed and validated, by which a tribo-layer formed at lower friction cycles was observed for the LPBF samples, meaning that AM will also be advantageous for the performance aspect of self-lubricating materials.

A novel sintering method of Al2O3/SiCw ceramic composites with improved wear resistance: Oscillatory pressure‐assisted sinter forging

Improved Mechanical Properties of Al2O3-25 Vol% SiCw Composites Prepared by Oscillatory Pressure Sintering

Fabrication and Mechanical Properties of ZrO2–Al2O3–SiC(w) Composites by Oscillatory Pressure Sintering

Enhanced Toughness and Reliability of Si3N4-SiCw Composites under Oscillatory Pressure Sintering

Mechanical and tribological properties of SiC whiskers reinforced SiC composites via oscillatory pressure sintering

Mechanical and Tribological Properties of SiC Whisker‐reinforced SiC Composites Via Oscillatory Pressure Sintering

Excellent Tribological Properties and Unique Wear-Resistance Mechanism of Binderless Tungsten Carbide Prepared Via Two-Step Oscillatory Pressure Sintering

Preparation and Friction Properties of SiC-Al2O3/2A50 Co-Continuous Composites

A Novel Approach to Improve Flexural Strength of Al2O3‐20 Wt% ZrO2 Composites by Oscillatory Pressure Sintering

Microstructure, mechanical and friction-wear properties of SiC-WC composite with Al and C as sintering aids

Optimization of microstructure and mechanical properties of oscillatory pressure sintered ZrO<sub>2</sub>-Al<sub>2</sub>O<sub>3</sub>-SiCp ceramics

Ultrafine‐grained WC‐based Ceramics Prepared Via Two‐step Oscillatory Pressure Sintering

Preparation of Al2O3/Ti(C,N)/ZrO2/CaF2@Al(OH)3 Ceramic Tools and Cutting Performance in Turning

Optimization of microstructure and mechanical properties of oscillatory pressure sintered ZrO2–Al2O3-SiCp ceramics

Enhanced mechanical and tribological properties of oscillatory pressure sintered WC–GNPs composites

Effect of Y2O3-stabilized ZrO2 Whiskers on the Microstructure, Mechanical and Wear Resistance Properties of Al2O3 Based Ceramic Composites

Tailoring Mechanical and Tribological Properties of Oscillatory Pressure Sintered Binderless WC Ceramics with Expanded Graphite Addition

Metallurgical reactions and tribological properties of self-lubricating Al-WS2 composites: Laser powder bed fusion Vs. spark plasma sintering

Fabrication and Abrasive Wear Behavior of ZrO2-SiC-Al2O3 Ceramic

Tribological behaviors of vacuum hot-pressed ceramic composites with enhanced cyclic oxidation and corrosion resistance

Spark Plasma Sintering Preparation of Tungsten Carbide-Reinforced Iron-Based Composite Materials: Wear Resistance Performance and Mechanism