Abstract:A polyoxymethylene/graphene nanocomposite is fabricated. Graphene is modified using liquid‐phase exfoliation and KH‐550. Enhanced tribomechanical behavior is achieved with 0.5 wt% graphene, ameliorated load transfer and lubricious transfer film on the interface. In this study, a viable route to the development of a high‐performance polyoxymethylene (POM)‐based nanocomposite is proposed to overcome tribomechanical‐related issues in high‐precision sliding parts. Prior to melt‐blending, graphene nanoplatelet (GNP) filler was processed via a series of liquid‐phase exfoliation and surface modification with 3‐aminopropyltriethoxysilane. Results indicate that GNP is successfully exfoliated with minimum defect ratio and improves interfacial bonding within the matrix. Uniform dispersion and stable load‐transfer capability of POM/GNP with 0.5 wt% loading significantly enhanced flexural, tensile and impact strength by overall 26.4%, in contrast to unfilled POM. Dry friction tests against a steel ball also showed the lowest reduction in friction coefficient and wear rate by 22% and 40.6%, respectively, at the same amount of GNP loading due to the large specific surface coverage and lubricious transfer film chelation onto the steel counterface. Furthermore, dissipated energy accumulation by friction work was calculated in the sliding interfaces based on friction force–displacement hysteresis loop where the POM/GNP 0.5 wt% wear surface consumed ca 21.7% less energy in a dry frictional shearing process compared to neat POM. However, lack or excess loading of processed GNP exhibited insufficient or poor matrix–filler adhesion and led to deterioration of the composite properties due to particle agglomeration which can cause stress concentration and serve as a failure site. The adoption of the proposed methodology would demonstrate excellent material characteristics in thin‐walled precision parts where both mechanical and tribological performances are the primary concern. © 2024 Society of Chemical Industry.

Enhanced mechanical and tribological properties of oscillatory pressure sintered WC–GNPs composites

Mechanical and Tribological Properties of SiC-GNPs Composites Prepared by Oscillatory Pressure Sintering

Tailoring Mechanical and Tribological Properties of Oscillatory Pressure Sintered Binderless WC Ceramics with Expanded Graphite Addition

Wear behaviour of graphene platelets reinforced WC-Co cemented carbide

WC+Co+graphene platelet composites with improved mechanical, tribological and thermal properties

Excellent Tribological Properties and Unique Wear-Resistance Mechanism of Binderless Tungsten Carbide Prepared Via Two-Step Oscillatory Pressure Sintering

Enhanced mechanical and tribological properties of graphene nanoplates reinforced TC21 composites using spark plasma sintering

Preparation and characterization of high hard and high tough ultrafine WC ceramics containing hybrid graphene and SiC nanowire

High-pressure synthesis and performance analysis of WC-cBN-MoS2 self-lubricating ceramic composites

Highly wear-resistant and low-friction Si3N4 composites by addition of graphene nanoplatelets approaching the 2D limit

Wear behavior of GNPs/ZrO2 reinforced composite ceramics sliding against Inconel 718

Tribological properties and wear resistance mechanism of WC-ZrO2-Al2O3 ceramics

Microstructure and Mechanical Properties of SiC-GNPS-SiCW Ceramics by Oscillatory Pressure Sintering

Ultrafine‐grained WC‐based Ceramics Prepared Via Two‐step Oscillatory Pressure Sintering

Tribological and mechanical endowments of polyoxymethylene by liquid‐phase exfoliated graphene nanofiller

A novel sintering method of Al2O3/SiCw ceramic composites with improved wear resistance: Oscillatory pressure‐assisted sinter forging

Tribological Behavior of UHMWPE Reinforced with Graphene Oxide Nanosheets

Preferentially oriented SiC/graphene composites for enhanced mechanical and thermal properties

Preparation of graphene nanoplatelets reinforced SiC composites by oscillatory pressure sintering

Simultaneous Improvements in Wear Resistance and Mechanical Properties of Uhmwpe Nanocomposite Fabricated Via A Facile Approach

On the tribology and grinding performance of graphene-modified porous composite-bonded CBN wheel