Abstract:Liquid‐phase laser irradiation produced regularly shaped graphene‐coated tungsten carbide (WC@G) core–shell particles, which were integrated into a TiB2 matrix via spark plasma sintering (SPS) to form TiB2/WC@G composite ceramics. Graphene detachment, pull‐out, and crack deflection were identified as the key toughening mechanisms of the composite ceramics. Liquid‐phase laser irradiation technology was utilized to synthesize graphene‐coated tungsten carbide (WC@G) core–shell composite materials with regular spherical morphology. Characterization via scanning electron microscopy, transmission electron microscopy (TEM), X‐ray diffraction, and Raman spectroscopy revealed the evolution of WC particle microstructure from sharp edges to regular spherical shapes post‐laser irradiation. High‐resolution TEM displayed a tightly knit core–shell structure. Raman spectroscopy confirmed graphene presence through D, G, and 2D peaks. Incorporation of WC@G into a titanium diboride matrix, followed by discharge plasma sintering, yielded TiB2/WC@G composite ceramic materials. Compared to TiB2/WC/G composite ceramic materials, the WC@G core–shell structure significantly enhanced sintering performance. Optimal mechanical properties were achieved with 6 wt.% WC@G, exhibiting a relative density of 99.6%, Vickers hardness of 18.5 GPa, flexural strength of 696.9 MPa, and fracture toughness of 8.5 MPa m1/2. Characterization identified graphene detachment, pull‐out, and fracture deflection as key mechanisms enhancing toughness in TiB2/WC@G composite ceramic materials.

Preparation and characterization of high hard and high tough ultrafine WC ceramics containing hybrid graphene and SiC nanowire

Enhanced strength and toughness of SiC/C composite ceramics via SiC@graphene core–shell nanoparticles

Determination of Microstructure and Mechanical Properties of Ceramics Bonded Tungsten Carbide Doped with Hybrid Graphene/sicw

Preparation of WC@graphene reinforced titanium diboride‐based composite ceramic materials fabricated via SPS

Mechanical Properties of WC-Si3N4 Composites with Ultrafine Porous Boron Nitride Nanofiber Additive

Microstructure and Mechanical Properties of SiC-GNPS-SiCW Ceramics by Oscillatory Pressure Sintering

Strengthening and Toughening Effects of MWCNTs on Si2BC3N Ceramics Sintered by SPS Technique

Fabrication, Microstructural Evolution, and Mechanical Properties of SiC/(Hf0.25Ta0.25Zr0.25Nb0.25)C/C Nanocomposites

Ultrafine Porous Boron Nitride Nanofiber‐toughened WC Composites

Effect of SiC Nano-Whisker Addition on WC–Ni Based Cemented Carbides Fabricated by Hot-Press Sintering

Preparation and mechanical behaviors of multiscale SiC nanowires/carbon fiber reinforced silicon oxycarbide ceramic composites

Sintering and Toughening Behavior of Dense SiC-coated Diamond Dispersed WC/Co Composites(Materials, Metallurgy & Weldability)

Combined effect of SiC and carbon on sintering kinetics, microstructure and mechanical properties of fine-grained binderless tungsten carbide

Processing and mechanical properties of B4C-SiCw ceramics densified by spark plasma sintering

Microstructure, mechanical and friction-wear properties of SiC-WC composite with Al and C as sintering aids

Enhanced mechanical and tribological properties of oscillatory pressure sintered WC–GNPs composites

Simultaneous hardening and toughening of a high entropy (NbTaZrW)C ceramic carbide using SiC particle

Microstructure and mechanical properties of oscillatory pressure sintered WC ceramics with different carbon sources

Residual Stress Effects on Toughening of Ultrafine-Grained B4C-SiC Ceramics

High toughness Si3N4 ceramic composites synergistically toughened by multilayer graphene/β-Si3N4 whisker: Preparation and toughening mechanism investigation

Ultrafine Binderless WC-based Cemented Carbides with Varied Amounts of AlN Nano-Powder Fabricated by Spark Plasma Sintering