Abstract:Thermophotovoltaic (TPV) device is a thermoelectric conversion method with great application prospects. In the far-field regime, the thermoelectric power is usually small due to the Planck blackbody radiation limit, but can be substantially enhanced in the near-field regime where evanescent waves will participate in the heat transfer by tunneling. In this aspect, the surface optical density of state is a key factor that will determine the transfer conversion of thermal photons. Plasmonic or phononic resonance materials have been discussed in the literature to acquire large heat flux. Besides, metamaterial is another way to pursue the design freedoms for the same purpose. In this work, we propose a [CaF2/W](n) multilayer based infrared hyperbolic metamaterial (HMM) with high surface density of states as an emitter of a high-performance TPV cell made of an InSb p-n junction (energy bandgap = 0.17 eV). The effective medium theory (EMT) is utilized to describe the electromagnetic behavior of the HMM. The near-field heat flux is calculated based on electrodynamic wave theory and Green's function method, and the photocurrent of thermophotovoltaic device is derived using diffusion equation for semiconductor. For comparison, we design three different radiators, i.e. tungsten film (W), [GaF2/W](n) multilayer hyperbolic metamaterial (HMM), and tungsten-grounded HMM (WHMM). Compared with the pure tungsten radiator, the artificial structure exhibits the hyperbolic dispersion characteristic in a wide frequency range, which gives rise to a higher local density of states, in particular in the hyperbolic-to-elliptic spectral transition region. As a result, the radiation power and the energy conversion efficiency are greatly enhanced, which are more easily realized by a matched emission band achieved by the structural design. We find that the thermophotovoltaic device with WHMM radiator has a similar power and conversion efficiency to that with the HMM radiator. The influence of the substrate can be ignored when the hyperbolic metamaterial is thicker than 140 nm, very beneficial to the actual fabrication of the device. By our system, with multilayer hyperbolic metamaterial (HMM) radiator, a high electric power >1 W/m(2) and a conversion efficiency about 11% can be obtained at a bias temperature of 200 K and a 100 nm vacuum gap. Compared with nanowire arrays or natural hyperbolic material, the multilayer structure proposed in this paper has obvious advantages in bandwidth and manufacturing and may find important applications in near-field thermophotovoltaic device and other relevant areas.

Bi2Te3/Sb2Te3 Heterojunction and Thermophotovoltaic Cells Absorbing the Radiation from Room-temperature Surroundings

Bi2Te3/Si thermophotovoltaic cells converting low temperature radiation into electricity

Low‐Temperature Thermophotovoltaic Cells by Bonding Bi2Te3 and Si Wafers

High-performance near-field thermophotovoltaic device with CaF<sub>2</sub>/W multilayer hyperbolic metamaterial emitter

Temperature induced electrical transport in n-Bi2Te3/p-InAs thermoelectric heterojunctions

Entropic and Near-Field Improvements of Thermoradiative Cells

Bi8Se7: Delocalized Interlayer π-Bond Interactions Enhancing Carrier Mobility and Thermoelectric Performance near Room Temperature

Room‐Temperature High‐Performance Thermoelectric Bi0.6Sb0.4Te: Elimination of Detrimental Band Inversion in BiTe

Ga 0.84 In 0.16 As 0.14 Sb 0.86 /InAs 0.91 Sb 0.09 Dual-Junction Device for Thermophotovoltaic Energy Conversion

Ultra-broadband and High Response of the Bi2Te3-Si Heterojunction and Its Application As a Photodetector at Room Temperature in Harsh Working Environments.

Bulk photovoltaic effect at infrared wavelength in strained Bi2Te3 films

Achieving High Thermoelectric Performance in Bi2(Te, Se)3 Thin Film with (00 l)-Oriented by Incorporating Tellurization and Selenization Processes

Photothermal synergistic high-sensitivity self-driven vertical asymmetric Te/Bi2Te3/In2O3 heterojunction near-infrared imaging photodetector

Synergistic Texturing and Bi/Sb‐Te Antisite Doping Secure High Thermoelectric Performance in Bi 0.5 Sb 1.5 Te 3 ‐Based Thin Films

Near-Field Thermophotovoltaic Energy Conversion with Thin-film Tandem Cells

Realizing thermoelectric cooling and power generation in N-type PbS0.6Se0.4 via lattice plainification and interstitial doping

In Situ Synthesis of High Thermoelectric Performance Bi2Te3 Flexible Thin Films through Thermal Diffusion Engineering

Unraveling electronic origins for boosting thermoelectric performance of p-type (Bi,Sb) 2 Te 3

Achieving High Thermoelectric Performance in Bi 2 (Te, Se) 3 Thin Film with (00 l )-Oriented by Incorporating Tellurization and Selenization Processes

Moderate-Temperature Near-Field Thermophotovoltaic Systems with Thin-Film InSb Cells

Comprehensive Insight into p -Type Bi 2 Te 3 -Based Thermoelectrics near Room Temperature