Abstract:Plasma-based accelerators driven by either intense lasers<a href="/articles/s41567-021-01202-6#ref-CR1">1</a> or charged particle beams<a href="/articles/s41567-021-01202-6#ref-CR2">2</a> can accelerate electrons or positrons with extremely high gradients compared with conventional radio-frequency accelerators. For their use as next-generation light sources and in energy frontier colliders<a href="/articles/s41567-021-01202-6#ref-CR3">3</a>, beams with good stability, high quality, controllable polarization and excellent reproducibility<a href="/articles/s41567-021-01202-6#ref-CR4">4</a>,<a href="/articles/s41567-021-01202-6#ref-CR5">5</a> are required. The accelerated electrons can be either internally injected directly from the background plasma or externally injected from conventional accelerators. Despite significant progress<a href="#ref-CR6">6</a>,<a href="#ref-CR7">7</a>,<a href="#ref-CR8">8</a>,<a href="#ref-CR9">9</a>,<a href="#ref-CR10">10</a>,<a href="#ref-CR11">11</a>,<a href="#ref-CR12">12</a>,<a href="#ref-CR13">13</a>,<a href="/articles/s41567-021-01202-6#ref-CR14">14</a>, the beam properties obtained with the internal injection scheme fall short of simultaneously reaching these requirements. In contrast, such high-property beams are routinely generated from conventional accelerators. Therefore, it is important to demonstrate the injection from a conventional accelerator into a plasma-based machine followed by further acceleration of the beam. Here we report the demonstration of external injection from a conventional linear accelerator into a laser wakefield accelerator and subsequent acceleration without any significant loss of charge, which is achieved by properly shaping and matching the beam into the plasma structure. The experimental results, combined with three-dimensional particle-in-cell simulations, indicate that this is possible with modest degradation in the beam quality. This work is an important step towards realizing a high-throughput, multistage, high-energy, hybrid conventional-plasma-based accelerator.

Achievement of high-current continuous-wave deuteron injector for Linear IFMIF Prototype Accelerator (LIPAc)

Linear IFMIF Prototype Accelerator (LIPAc) Radio Frequency Quadrupole's (RFQ) RF couplers enhancement towards CW operation at nominal voltage

Status of the Los Alamos heavy ion injector

Concept of Staged Approach for International Fusion Materials Irradiation Facility

Proton Injector Acceptance Tests for a Dielectric Wall Accelerator (dwa):Characterisation of Advanced Injection System of Light Ions (AISLI)

IFMIF/EVEDA achievements overview

High-throughput injection–acceleration of electron bunches from a linear accelerator to a laser wakefield accelerator

Beam dynamic design of a high intensity injector for proton linac

Enabling a Multi-Purpose High-Energy Neutron Source Based on High-Current Compact Cyclotrons

3.5 MeV Pulsed Power System for LIA Injector

External injection from a Linac into a LWFA with ~100% capture efficiency (Conference Presentation)

Beam Commissioning Status and Results of the FNAL PIP2IT Linear Accelerator RFQ

Measurements of momentum halo due to the reduced RFQ voltage during the LIPAc beam commissioning

THE R&D STATUS OF SSC-LINAC

Successful High Power Acceleration of the HSC Type Injector for Cancer Therapy in IMP

Beam Dynamics Studies at the PIP-II Injector Test Facility

The beam commissioning of a CW high charge state heavy ion RFQ

Advances of the FRIB Project

Beam commissioning of the demonstrator setup for the superconducting continuous wave HIM/GSI-Linac

DESIGN OF AN L-BAND RF PHOTOINJECTOR FOR THE IDAHO ACCELERATOR CENTER 44 MeV LINAC

Abstract Submitted for the DPP16 Meeting of The American Physical Society Using Quasi-3D OSIRIS simulations of LWFA to study generating high brightness electron beams using ionization and density downramp